ÖSSZESEN

379

TELEFON

Oldmobil - régi mobiltelefonok - Old mobile phones

Oldmobil.hu

Mobiltelefon múzeum és gyűjtemény
Mobile phone museum and collection
Handy Museum und Sammlung

Régi mobiltelefonok, ritkaságok, különleges mobilok, retro csengőhangok MP3-ban, retro videók

Mobilok gyártók szerint:

AEG (3 db )
Aiwa (1 db )
Alcatel (26 db )
Ascom (3 db )
Benefon (10 db )
Benq Siemens (1 db )
Blaupunkt (1 db )
Bosch (7 db )
Cect (1 db )
Dancall (1 db )
Deutsche Post (1 db )
Ericsson (60 db )
Hagenuk (3 db )
Kyocera (1 db )
LG (3 db )
Maxon (5 db )
Mitsubishi (1 db )
Motorola (65 db )
NEC (5 db )
Nokia (71 db )
Panasonic (9 db )
Philips (12 db )
Sagem (9 db )
Samsung (5 db )
Sharp (6 db )
Siemens (42 db )
Sony (10 db )
Sony Ericsson (9 db )
Spectronic (1 db )
Trium (3 db )
Telital (2 db )

Évjárat szerint

1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 n.a.
A teljes gyűjtemény
Statisztikák

Telefonkereső


Rendszer szerint

AMPS, CDMA 1900 (1) db AMPS, CDMA 800 (1) db AMPS, D-AMPS 800/1900 (1) db C-Netz (3) db CDMA (1) db ETACS (21) db GSM 1800 (8) db GSM 1900 (2) db GSM 850/900/1800/1900 (4) db GSM 850/900/1800/1900 (1) db GSM 900 (110) db GSM 900/1800 (135) db GSM 900/1800/1900 (37) db GSM 900/1800/1900 (1) db GSM 900/1800/1900, UMTS 2100 (6) db GSM 900/1800/1900/UMTS 2100 (1) db GSM 900/1900 (1) db GSM-900 (2) db iDEN (1) db IS-95 (1) db NMT 450 (27) db NMT 900 (2) db PDC 800 (1) db PHS 1900 (1) db RLL (2) db UMTS, GSM 900/1800 (2) db

Mobilgyűjtemények

Mohi Attila gyűjteménye
Egyebek a gyűjteményben

E-mail

peter@oldmobil.hu

.

Motorola Bible


********************************************************************************
*                                                                              *
*                            THE MOTOROLA BIBLE (c)                            *
*                       For all Cellular AND Pager Info                        *
*                                                                              *
*                    MOTOROLA USERS AND PROGRAMMING GUIDES                     *
*                                By Mike Larsen                                *
*                                                     Ver. 3.0      ************
*                                                                   *  1/14/97 *
********************************************************************************

Table of Contents:

		1  Introduction              8   Phone Pin Outs
		2  General User Info         9   Cable Specs
		3  Programming Info          10  Channel Number vs. Frequency
		4  Test Mode                 11  Trik Clip
		5  GSM Info and Test Mode    12  Pager Info
		6  Hacking the FOVC          13  Disclaimer
		7  Reading the SID


I*N*T*R*O*D*U*C*T*I*O*N****************************************S*E*C*T*I*O*N***1

GENERAL DISCLAIMER:

	I, Mike Larsen, am in no way affiliated with Motorola or the Motorola
Cellular Subscriber Group or any other subsidiaries.  I offer this guide free to
the public not to encourage fraudulent use, but to give others the same
information I obtained for free (and sometimes for money).  Use of any
information from this text (in part or whole) is encouraged provided proper
credit is given to the author (Mike Larsen) and the work (The Motorola Bible).
Sale of this work (in whole or in part) is not discouraged provided proper
credit is given, names are left intact, and Email notice is given.  After all,
if someone is stupid enough to give money for something that is available on
the web for free, well...
        This manual is not intended to be an aid in cellular fraud.  Cell fraud
is both illegal and immoral.  Would you like someone to make charges on your
phone?  If you want free calls, you want to check elsewhere for that information
because that type of information is NOT mentioned in the Motorola Bible.
	This manual is not intended for use by people with little electronics
experience.  This is not a tutorial and not intended to be used except by
people with previous cellular experience and are familiar with programming
cellular phones.
        If you have any additions or corrections about this manual, please
email me at:

        mjlarsen@hotmail.com

Additional Info:

	It has come to my attention that this has been sold at ham fests and
my name removed throughout the text.  This will no longer happen.  As of July
10, 1996, this is copyrighted work.  All rights are reserved and I will
prosecute.  If you want to sell it, fine.  I don't ask for any of the profits.
All I ask is you leave the entire text intact with my name as it appears.

	Also, Dr. Who has been crying about the fact I removed a little
anecdotal story from the beginning of his portion in the bible.  He released
version 2.3 and put the story back in.  Since it was not pertinent to cellular,
it will not be included.  I have given him credit for what I have used and I
am within my legal right to publish his little section provided I give him
credit (which I have).  I do find it very amusing that he failed to give me
any credit on his web page, considering his Motorola section is just my bible
in HTML format...and I didn't cry.  (Hah!)


G*E*N*E*R*A*L***U*S*E*R***I*N*F*O******************************S*E*C*T*I*O*N***2

	Before going in to the programming of the cellular phone, it is
important for the user to know the normal things necessary for day to day
operation.  While the majority of the stuff in the users manual is intended
for people that have problems programming their VCR, their are a few things
that are very important and are only mentioned in the users manual.

		   Turn On or Off: [Pwr]
		       Place Call: Enter number, [Snd]
		     Receive Call: [Snd] or open flip fone
			 End Call: [End] or close flip fone
		 Automatic Redial: To retry call, press [Snd] before ending the
				   unsuccessful call attempt.
		     Store Number: Phone number, [Sto], 2-digit location number
				   or press [*] to autoload.

				   If phone is Alphanumeric, display will flash
				   "Alpha_".  Press [Sto] to bypass or use
				   keypad to enter letter (up to 14).  [#]
				   advances to next position, [*] backspaces.
				   When finished, press [Sto].
		    Recall Number: [Rcl], 2-digit location number.  Entering
				   location 01, then hitting [#] will allow
				   scrolling through all stored locations.
		      Recall Name: Press [Name/Menu], [#] or [*] to scroll.
				   [Rcl] will display location number then name,
				   [Rcl] again will display corresponding phone
				   number and [Snd] to dial.
 Recalling Last 10 Numbers Called: [Rcl], [0], [0].  Display will show "L0'"
				   followed by the name or number of the most
				   recently placed call.  Use [#] or [*] to
				   scroll and [Snd] to call displayed number.
	      Super Speed Dialing: Directory location number, [Snd]
		 Changing Entries: Press [Rcl] and the 2-digit location number
				   so that the number to be changed is
				   displayed.  Press and release [Clr] to back
				   out each of the digits. Enter a new number
				   and press [Sto].
	    Call Number Displayed: [Snd]
		Microphone Muting: Press [Fcn], [6].
				   To unmute, press [Fcn], [6]
			Lock Unit: [Fcn], [5] or [LOCK]
			   Unlock: Three digit unlock code.  If you make an
				   error, [Clr] and enter again.
		   Automatic Lock: [FCN], [6] (not all phones)
				   "EnAbLE" will appear if compatible.
	      Display Unlock Code: Press [Fcn], [0], your six-digit security
				   code, [Rcl].
	Changing Your Unlock Code: Press [Fcn], [0], your six-digit security
				   code, your NEW 3-digit unlock code, [Sto].
	     Review Battery Meter: Press [Fcn], [4] and release.
		    Adjust Volume: Earpiece - Press and hold [Vol] to increase.
					      Release, press again to decrease.
				     Ringer - [Fcn], then Vol as above.
	  Recall Own Phone Number: [Rcl], [#]
	    Individual Call Timer: [Rcl], [#], [#]
	    Resettable Call Timer: [Rcl], [#], [#], [#]
      Reset Resettable Call Timer: [Fcn], [0], [7], [Clr]
	    Cumulative Call Timer: [Rcl], [#], [#], [#], [#]
		  Access Features: Press [Fcn], [1].  To change features, press
				   [*] and [#] to scroll and [Clr] to change.
				   To exit feature menu, press [END].
      Review/Scroll Menu Features: Press [*] or [#]
		    Status Review: [Fcn], [0], [9], [Rcl], [#] or [*] scrolls
				   messages.  To end press [END].
	     Changing System Type: Press [Rcl], [*].  Repeatedly press [*]
				   until the desired system type appears.  To
				   select press [Sto].
       Outgoing Call Restrictions: Press [Fcn], [0], 6-digit security code,
				   [1], [Sto].  Phone will place calls only
				   from memory locations 1-10.
				   To change back to unrestricted dialing
				   press [Fcn], [0], 6-digit security code,
				   [4], [Sto].
    Switch to Second Phone Number: [Rcl], [#], [Sto]  (Press [Clr] to finish
				   viewing newly activated number).

		    Key     1st Press   2nd Press   3rd Press   4th Press
		     2          A           B           C
		     3          D           E           F
   Alpha             4          G           H           I
   Entry             5          J           K           L
   Mode              6          M           N           O
		     7          P           Q           R           S
		     8          T           U           V
		     9          W           X           Y           Z

Menu Features:  For a more detailed description or instructions on use, consult
		the user manual.  Not all features listed are available on all
		models.

     Message             Description

   1 Min Beep     One Minute Beep
   Answer M Key   Multiple Key Answer
   Auto Answer    Automatic Answer
   C Scan         System Type Selection
   Call Screen    Incoming Call Screening
   Emrcy Off      Emergency Dialing
   Home           System Type Selection
   Level 1-6      Call Restrictions (Service Levels)
   Lock Auto      Automatic Lock
   Name Pref'd    Memory Recall Preference
   Pin Active     PIN Code Activation
   Pref'd SIDs    System Type Selection
   Remind Beeps   Reminder Beep Off
   Ringer Silent  Alert Off (Silent Ringer)
   Scan A         System Type Selection
   Scan AB        System Type Selection
   Scan B         System Type Selection
   Scan BA        System Type Selection
   Scrpd Silent   Silent Scratch Pad
   Signal Off     Signal Strength Meter
   Silent Keypad  Feedback Tones Off
   Std            Features Set as Standard
   Theft Alarm    Theft Alarm
   Timer Auto     Automatic Display Timer
   Vox Mode       Voice Operated Transmission
   Vibrat Mode    VibraCall

	I would like to add that while I have extensively worked on finding
additional test mode commands, I (nor anyone else) have ever worked with the
normal operation commands as listed above.  For example, above you will
notice sequences with [Fcn], [1] or [Fcn], [0], [7].  This is totally
unexplored territory.  Happy hacking :)  See entering test mode on the new
95xx phones.

--------------------------------------------------------------------------------

Activating the PIN in PIN READY cellfones      Thanks to fringe@rndhse.chi.il.us

(You cannot use their fone without the PIN activated)

Activating the PIN Ready feature in Motorola fones:

1. Enter user menu - press FNC,1 or FNC,Menu
2. Select Pin Active in menu and press * once or until "Pin Active"
   appears in the fone display.
3. Enable 'Pin Active' feature - press CLR.
   A small square will appear before 'Pin Active' sayings its enabled.
4. Exit user menu - press END

To store the PIN into memory:

1. Enter the specific PIN code - press XXXX
2. Store four digit PIN into memory location 07 - press STO,0,7
3. Return to normal operation - press CLR

To initiate a call using the PIN Ready feature:

1. Enter the phone number you wish to call:
    press (XXX)XXX-XXXX, SND
2. You will hear two short rings, then press SND again.  The PIN
   Ready feature will automatically send the PIN code you previously
   stored into memory location 07 and initiate your call.


---------
What is EE3??

    EE3 is the software that Motorola has added to the cellular
product line which provides feature enhancements and increased
security by restricting ESN transfer...
---------
Why did the changes take place...

     Due to the FCC Rule change, all new cellular telephones
that were introduced after Jan. 1, 1995 with new FCC IDs must restrict
ESN transfer. Phones introduced prior to this date are "grandfathered"
or not required to be compliant with this rule.
---------
How ya can tell the difference between an EE3 and a non-EE3 fone.

     These fones will be identified with the marking of EE3 on the
FCC label (look on da back of da fone)
---------
How does the fone change?!

     Some of the changes EE3 phones have are feature differences,
accessory compatibility, and service differences.
---------
Which fones have the PIN CODE feature?!

	If the phones has EE3 on the back label, then the fone has the
PIN CODE feature; with the exception of the EE3 TeleTacs and the
pre-AC-P300 boxed contours.
---------
Can a 3-watt VA be used with EE3 fones?!

     No, the existing 3-watt VA is not compatible with EE3 fones.
The following part numbers are for the new 3-watt booster for EE3 fones
and for conversion kits for existing 3-watt kits.  The 3-watt booster
has its own handset that comes with it.

Deluxe Booster w/Micro Car Handsfree Kit (EE3 pocket and flip)
# S-5415
Deluxe Booster w/Micro Car Handsfree Kit (EE3 Elite) 
# S-5093
Deluxe Booster Conversion Kit (EE3 pocket and flip)
# S-5094
Deluxe Booster Conversion Kit (EE3 Elite)
# TBA
-----------
Which Motorola fones have the new Lock feature?!

    All EE3 fones have the NEW lock feature - FCN,5 and STO to lock it

--------------------------------------------------------------------------------

Well, it seems a lot of people have been trying to figure out the date of
manufacture of Motorola cellular phones.  This is easily accomplished by
locating the MSN (Mechanical Serial Number) somewhere on the telephone.  It can
be 10 or 11 digits.  If there is no 11th digit, warranty period is one year.  If
there is an 11th digit, the warranty period can be determined from the following
charts.  Without a proof of purchase, warranty date is determined by adding 3
months to the date of manufacture.

MSN Example: 194GSTxxxxW

		194 is the Accounting Product Code (APC) and has little use.
		  G is the location of manufacture
		  S is the Year Code of manufacture
		  T is the Month Code of manufacture
	       xxxx is the actual serial number (hex) of that telephone
		  W is the Warranty Period

Year Code Year   Month Code Month                  Warranty Period Definition
    H     1983     A or B   January          A   1 yr w/ possible MCSI coverage
    J     1984     C or D   February         B   3 yrs w/ possible MCSI coverage
    K     1985     E or F   March            C   5 yrs w/ possible MCSI coverage
    L     1986     G or H   April            D   2 yrs w/ possible MCSI coverage
    M     1987     J or K   May              E   No Warranty
    N     1988     L or M   June             F   90 Days OEM only
    P     1989     N or P   July             H   3 Years, Canada Only
    Q     1990     Q or R   August           L   3 Years, OEM Only
    R     1991     S or T   September        M   1 Year, OEM Only
    S     1992     U or V   October          N, P, X   5 Yrs
    T     1993     W or X   November         Q, R, S, Y, Z   3 Yrs
    U     1994     Y or Z   December         T   OEM Telephone
    V     1995                               U   90 Days (Reconditioned Units)
    W     1996                               W   4 Yrs.
    X     1997
    Y     1998     Location of Manufacture Code     Location
    Z     1999                   G                  Libertyville, IL.


P*R*O*G*R*A*M*M*I*N*G***I*N*F*O********************************S*E*C*T*I*O*N***3

NOTES:  Some units have dual NAM's.
	The ESN prefix is 130 decimal, 82 hex.
	Motorola: 1-800-331-6456

There are MANY different models of Motorola phones sold under various
brand names, if you think it's a Motorola, it probably is.

Determine which access sequence to use:

HAND HELD PORTABLE MODELS

If the phone has a FCN button and no MENU button use sequence 1.
If the phone has no FCN button use sequence 2.
If the phone has a MENU button and a FCN button use sequence 4.

INSTALLED MOBILE PHONES AND TRANSPORTABLE MODELS

If the phone has no FCN button and no RCL button use sequence 3.
If the phone has a FCN button use sequence 4.
If the phone has a MEM button use sequence 5.
If the phone has a RCL button and no FCN button use sequence 6.


SEQUENCE#     ACCESS CODE

1             FCN   (SECURITY CODE TWICE) RCL
2             STO # (SECURITY CODE TWICE) RCL
3             CTL 0 (SECURITY CODE TWICE) *
4             FCN 0 (SECURITY CODE TWICE) RCL
5             FCN 0 (SECURITY CODE TWICE) MEM
6             CTL 0 (SECURITY CODE TWICE) RCL

The default security code is 000000.  The CTL (control) button is the
single black button on the side of the handset.


NAM programming:

1.  Turn the power on.

2.  Within ten seconds enter the access sequence as determined above.

3.  The phone should now show "01" in the left of the display, this is the
    first programming entry step number.  If it does not the security code
    is incorrect, or the programming lock-out counter has been exceeded.  In
    either case you can still program the unit by following the steps under
    TEST MODE PROGRAMING below.

4.  The * key is used to increment each step:

    Each time you press * the display will increment from the step number,
    displayed on the left, to the data stored in that step, displayed on
    the right.  When the data is displayed make any necessary changes and
    press * to increment to the next step number.

5.  The SND key is used to complete and exit programming when any STEP
    NUMBER is displayed.

    If you have enabled the second phone number bit in step 10 below then
    pressing SND will switch to NAM 2.  Steps 01 thru 06, 09 and 10 will
    repeat for NAM 2, the step number will be followed by a "2" to indicate
    NAM two.

5.  The CLR key will revert the display to the previously stored data.

6.  The # key will abort programming at any time.


PROGRAMING DATA:

STEP#    #OF DIGITS/RANGE    DESCRIPTION

01       00000 - 32767       SYSTEM ID
02       3 DIGITS            AREA CODE
03       7 DIGITS            TEL NUMBER
04       2 DIGITS            STATION CLASS MARK
05       2 DIGITS            ACCESS OVERLOAD CLASS
06       2 DIGITS            GROUP ID (10 IN USA)
07       6 DIGITS            SECURITY CODE
08       3 DIGITS            LOCK CODE
09       0333 OR 0334        INITIAL PAGING CHANNEL
10       6 DIGIT BINARY      OPTION PROGRAMING (SEE NOTE 1)
11       3 DIGIT BINARY      OPTION PROGRAMING (SEE NOTE 2)


NOTES:

Take care with Motorola's use of "0" and "1".  Some options use "0" to
enable, some use "1".

1.  This is a 6 digit binary field used to select the following options:

    Digit 1:  Internal handset speaker, 0 to enable.
    Digit 2:  Local Use Mark, 0 or 1.
    Digit 3:  MIN Mark, 0 or 1.
    Digit 4:  Auto Recall, always set to 1 (enabled).
    Digit 5:  Second phone number (not all phones), 1 to enable.
    Digit 6:  Diversity (Two antennas, not all phones), 1 to enable.

2.  This is a 3 digit binary field used to select the following options:

    Digit 1:  Continuous DTMF, 1 to enable.
    Digit 2:  Transportable Ringer/Speaker, 0=Transducer, 1=Handset.
    Digit 3:  8 hour time out in transportable mode, 0 to enable.


On newer models, they have added and changed some numbers.  The numbers
as of the 3/27/92 manual are as follows:

1.  The 6 digit binary field is still the same.

2.  The 3 digit binary field has become a 5 digit binary field.

    Digit 1:  Failed Page Indicator                        1=Disabled;0=Enabled
    Digit 2:  Motorola Enhanced Scan                       1=Enabled; 0=Disabled
    Digit 3:  Long Tone DTMF                               1=Enabled; 0=Disabled
    Digit 4:  Transportable Internal Ringer Speaker        1=Handset; 0=Transdcr
    Digit 5:  Eight Hour Timeout                           1=Disabled;0=Enabled


T*E*S*T***M*O*D*E**********************************************S*E*C*T*I*O*N***4

			      TEST MODE ACCESS:

NEWER 95xx PHONES (Thank you Motorola!!!)

  Many newer phones don't require grounding.  If your software version number
  is 9526 (I think) or newer, enter this:

  [FCN] [0] [0] [*] [*] [8] [3] [7] [8] [6] [6] [3] [3] [STO]

  In case you have trouble remembering the number sequence, it spells out
  "TESTMODE."  Leave it to Motorola to make this easier and easier all the time.
  I have used this and it does work.  This command just backs up my claim even
  further that esn changing via handset is a reality.  It's a matter of finding
  the correct combination of keys.

  Normal test mode commands work like usual from then on.

  For some odd reason, this hasn't been included in all the 95xx phones.  I
  believe they started it in Software 9526.  This is only an estimate, so if
  you have a 95xx flip, let me know what software version you have and whether
  it works or not so this date can be isolated.  Mine is a 9562 that worked.

INSTALLED MOBILE PHONES AND TRANSPORTABLE MODELS

To enter test mode on units with software version 85 and higher you must
short pins 20 and 21 of the transceiver data connector.  An RS232 break out
box is useful for this, or construct a test mode adapter from standard
Radio Shack parts.

For MINI TR or Silver Mini Tac transceivers (smaller data connector) you
can either short pins 9 and 14 or simply use a paper clip to short the
hands free microphone connector.

HAND HELD PORTABLE MODELS:

There are two basic types of Motorola portable phones, the Micro-Tac series
"Flip" phones, and the larger 8000 and Ultra Classic phones.  Certain newer
Motorola and Pioneer badged Micro-Tac phones do not have a "flip", but
follow the same procedure as the Micro-Tac.

8000 & ULTRA CLASSIC SERIES:

If you have an 8000 series phone determine the "type" before trying to
enter test mode.  On the back of the phone, or on the bottom in certain
older models, locate the F09... number this is the series number.  If the
FOURTH digit of this number is a "D" you CAN NOT program the unit through
test mode, a Motorola RTL4154/RTL4153 programmer is required to make any
changes to this unit.

Having determined that you do not have a "D" series phone the following
procedure is used to access test mode:

Remove the battery from the phone and locate the 12 contacts at the top
near the antenna connector.  These contacts are numbered 1 through 12 from
top left through bottom right.  Pin 6, top right, is the Manual Test Mode
Pin. You must ground this pin while powering up the phone.  Pin 7 (lower
left) or the antenna connector should be used for ground.  Follow one of
these procedures to gain access to pin 6:

1.  The top section of the battery that covers the contacts contains
nothing but air.  By careful measuring you can drill a small hole in the
battery to gain access to pin 6, alternately simply cut the top off the
battery with a hack saw.  Having gained access use a paper clip to short
pin six to the antenna connector ground while powering up the phone.

2.  If you do not want to "destroy" a battery you can apply an external 7.5
volts to the + and - connectors at the bottom of the phone, ground pin 6
while powering up the phone as above.

3.  You can also try soldering or jamming a small jumper between pins 6 and
7 (top right to lower left), or between pin 6 and the antenna connector
housing ground.  Carefully replace the battery and power up the phone.  Use
caution with this method not to short out any other pin.

4.  A cigarette lighter adapter, if you have one, also makes a great test
mode adapter as it can be disassembled to give you easier access to pin 6.
Many are pre marked, or even have holes in the right location.  This is
because they are often stamped from the same mold that the manufacturer
uses for making hands free adapter kits and these kits require access to
the phone's connectors.

ULTRA CLASSIC II SERIES:

  Ground Pin 2 to pin 4.

MICRO-TAC "FLIP" SERIES:

This phone follows similar methods as outlined for the 8000 series above.

Remove the battery and locate the three contacts at the bottom of the
phone, the two outer contacts are raised and connect with the battery.  The
center contact is recessed, this is the Manual Test Mode connector.

Now look at the battery contacts, the two outer ones supply power to the
phone, the center contact is an "extra" ground.  This ground needs to be
shorted to the test mode connector on the phone.  The easiest way to do
this is to put a small piece of solder wick, wire, aluminum foil or any
other conductive material into the recess on the phone.  Having done this
carefully replace the battery and turn on the power, if you have been
successful the phone will wake up in test mode.

GENERAL NOTES:

HANDSETS:  Most Motorola handsets are interchangeable, when a handset is
used with a transceiver other than the one it was designed for the display
will show "LOANER".  Some features and buttons may not work, for instance
if the original handset did not have a RCL or STO button, and the
replacement does, you will have to use the control * or control # sequence
to access memory and A/B system select procedures.

LOCK/UNLOCK PROCEDURES:

     Phones with "LOCK" buttons:  Press lock for at least 1/2 a second.

     Phones with a "FCN" button:  Press FCN 5, note that 5 has the letter's
				  "J,K, and L" for lock.

     Phones with no FCN or LOCK button:  Press Control 5, control is the black
					 volume button on the side of the
					 handset.

SYSTEM SELECT PROCEDURES:

     Phones with a RCL button:  Press RCL *, then * to select, STO to store.

     Phones with no RCL button: Press Control * then * to select, # to store.

     Options are:    CSCAn:    Preferred/Non preferred with system lockout.
		     Std A/b, or Std b/A:  Preferred/Non preferred.
		     SCAn Ab, or SCAn bA:  Non preferred/Preferred
		     SCAn A:  "A" ONLY
		     SCAn b:  "B" ONLY
		     HOME:     Home only
		     Pref'd SIDS:  Service within the entered SIDS (up to 15)

     (these are typical options, some phone's vary.  C-Scan is only available
     on newer models and does not appear unless programmed, see below.)

--------------------------------------------------------------------------------

				 TEST MODE

NOTE: Not all commands work on all telephones.  If a command is not valid the
      display will show "ErrOr."  Not all numbers have been assigned.  Not all
      numbers have been listed here.  Some commands were intended only for
      Motorola factory applications.   (This is the disclaimer in the
      technical training manual.  I have included all of the other commands I
      have discovered one way or another.  Some that say no function do have
      a function but it is unknown until it is figured out.)


Three test commands are significant for programming and registering the
the telephone for service:  see full descriptions under TEST MODE COMMANDS.

32#  Clears the telephone.  (Older Motorola allowed either three or fifteen
changes in the MIN.  After that, the phone had to be sent to Motorola to reset
the counter.  This is the command they use.)

38#  Displays the ESN

55#  This is the TEST MODE PROGRAMMING (as described below).


			      TEST MODE DISPLAY:


Test mode consists of two separate levels.  When the telephone is first placed
in Test Mode, it is in the STATUS DISPLAY LEVEL.  The display will be scrolling
(or flashing), or it will be locked.  If locked, enter the unlock code and the
display will begin scrolling.  If the unlock code is not known, press #.  By
pushing the # key, the technician causes the cellular telephone to change to
its SERVICING LEVEL.  The display will be   US'  .  There are five types of
display, depending on the model of the telephone: a 16 character display, a 14
character display, a 10 digit display (with two versions), an 8 character
display, and a 7 character display.  The status display is different in analog
operation than in a TDMA call.

NOTE: Use of a loaner handset is allowed in servicing level, but may not be
allowed in the status display level.  A locked telephone will not show the
status display, but will enter the servicing level.


14 Character Analog Call Display                  14 Character TDMA Call Display

      +---------------+                                 +---------------+
      | A B C D E F G |                                 | A B C D E F G |
      | H I J K L M N |                                 | H I J K L M N |
      +---------------+                                 +---------------+

ABC = Channel                                     ABC = Channel ("A" in the
D   = *Call Processing Mode                             position indicates a
EFG = RSSI                                              channel above 1000)
H   = **(D)SAT                                    D   = *Call Processing Mode
I   = 1=TX on                                     EFG = RSSI
J   = 1=Signalling Tone On                        HIJ = Digital Verification
K   = Power Level (0-7)                                 Color Code (1-255)
L   = 1=Control Channel                           K   = Power Level (0-7)
M   = 1=RX Audio off                              L   = 1=TX on
N   = 1=TX Audio off                              M   = 1=Bit Error Rate (0-7)
						  N   = 1=Audio Muted

*Call Processing Mode:                            *Call Processing Mode
BLANK = AMPS                                      BLANK = AMPS
A = NAMPS High Sub-Channel                        1 = Slot 1, half rate
B = NAMPS Center Sub-Channel                      2 = Slot 2, half rate
C = NAMPS Low Sub-Channel                         3 = Slot 3, half rate
						  4 = Slot 4, half rate
**(D)SAT:                                         5 = Slot 5, half rate
0 = 5970 Hz                                       6 = Slot 6, half rate
1 = 6000 Hz                                       7 = Slot 1, full rate
2 = 6030 Hz                                       8 = Slot 2, full rate
3 = No SAT                                        9 = Slot 3, full rate
------------
0-6 = DSAT Vector                                 NOTE:  The Analog Call
7 = No DSAT                                              Display will always
							 show when on a control
							 channel.

--------------------------------------------------------------------------------

#    Enter SERVICING LEVEL from Test Command Mode.

00#  no function

01#  Restart (Re-enter DC power start-up routine.)  On TDMA telephones, this
     command has the same effect as 13#.

02#  Display Current Telephone Status (This is a non-altering version of the
     STATUS DISPLAY.  On a 14 character display, all the information is shown.
     On a 7 character display only the information on the second line of a 14
     character display is shown.  On a 10 character display, all the
     information on the second line of a 14 character display plus the last
     three characters of the first line are shown.)

     STATUS DISPLAY, ALTERNATES BETWEEN:

     AAA BBB   AAA = Channel Number (decimal)    BBB = RSSI reading for channel
     CDEFGHI   are as follows:

     C = SAT frequency (0=5970, 1=6000, 2=6030, 3=no channel lock)
     D = Carrier (0=off, 1=on)
     E = Signalling tone (0=off, 1=on)
     F = Power attenuation level (0 through 7)
     G = Channel mode (0=voice channel, 1=control channel)
     H = Receive audio mute (0=unmuted, 1=muted)
     I = Transmit audio mute (0=unmuted, 1=muted)

     Press * to hold display and # to end.

03#  Reset Autonomous Timer.   This command results in the reset of the
     autonomous timer but does not provide any test function on these models.

04#  Initializes Telephone to Standard Default Conditions:
     Carrier Off, Power Level 0, Receiver Audio Muted, Transmit Audio Muted,
     Signalling Tone Off, SAT Off, Resetting of Watch-Dog Timer Enabled,
     DTMF and Audio Tones Off, Audio Path Set to Speaker

05#  TX Carrier On (Key Transmitter)

06#  TX Carrier Off

07#  RX Audio Off (Mute Receiver Audio)

08#  RX Audio On (Unmute Receiver Audio)

	    NOTE:  It seems Motorola finally discovered that people were using
		   this command to eaves-drop on cellular converstions.  On MOST
		   of the newer phones (95xx and up), this command when used
		   with 11xxxx# will only work with the following channels:

		   11xxxx#     Tower Freq.  Mobile Freq. Channel

		     #300      Tx  879.00   Rx  834.00    0300
		     #333      Tx  879.99   Rx  834.99    0333
		     #385      Tx  881.55   Rx  836.55    0385
		     #799      Tx  893.97   Rx  848.97    0799
		     #991      Tx  869.04   Rx  824.04    0800

09#  TX Audio Off

10#  TX Audio On

11(Ch.No.)# Set Transceiver to Channel xxxx (Receive and Transmit in Decimal;
	    accepts 1, 2, 3, or 4 digits)

	    see Section 9 for detailed information on this command

12x# Set Power Step to x; (0,1-7) 0=Maximum Power (3 Watts) 7=Minimum Power Out

13#  Power Off (Shuts off the radio)

14#  10 kHz Signalling Tone On

15#  10 kHz Signalling Tone Off

16#  Setup  (Transmits a five word RECC message; each of the five words will
     be "FF00AA55CC33."  Transmitter de-keys at the end of the message.)

17#  Voice  (Transmits a two word REVC message; each of the two words will be
     "FF00AA55CC33."  Transmitter de-keys at the end of the message.)

18#  C-Scan  (Allows for entry of as many as 5 negative SID's for each NAM.)

     Newer Motorola phones are equipped with a feature called C-Scan, this is
     an option along with the standard A/B system selections.  C-Scan allows
     the phone to be programmed with up to five inhibited system ID's per NAM.
     This is designed to prevent the phone from roaming onto specified non-home
     systems and therefore reduce "accidental" roaming fees.

     1.  C-Scan can only be programmed from test mode, power phone up with the
	 relevant test mode contact grounded (see above).

     2.  Press # to access test mode.

     3.  Press 18#, the phone will display "0    40000".

     4.  Enter the first inhibited system ID and press *.

     Continue to enter additional system ID's if required.  After the 5th entry
     the phone will display "N2". Press * to continue and add system ID's for
     NAM 2 as required.

     5.  If an incorrect entry is made (outside the range of 00000-32767) the
	 display will not advance, press CLR and re-enter.  Use a setting of
	 40000 for any un-needed locations.

     6.  When the last entry has been made press * to store and press # to exit,
	 turn off power.

     or

     [**Phones without the C-Scan option used this command to SEND NAM.**]

18#  SEND NAM.  Display shows AA BB.  Where AA=Address and BB=Data.  Displays
     the contents of the NAM, one address at a time, advanced by pressing the
     * key.  The following data is contained in NAM.  The test is exited by
     depressing the # key.
     SIDH                 Sec. Code
     OPT. (1,2,&3)        MIN
     MIN1, MIN2           FCHNA
     SCM                  FCHNB
     IPCH                 NDED
     ACCOLC               CHKSUM       GIM

19#  Display Software Version Number  (4 digits displayed as year and week)

NOTE:  Entering commands 20# through 23# or 27# causes the transceiver to begin
       a counting sequence or continuos transmission as described below.  In
       order to exit from the commands to enter another test command, the #
       key must be depressed; all other key depressions are ignored.

20#  Receive control channel messages counting correctable and uncorrectable
     errors.  When the command starts, the number of the command will be
     displayed in the upper-right corner of the display.  Entering a # key
     will terminate the command and display two three-digit numbers in the
     display.  The first number is the number of correctable errors and the
     second is the uncorrectable errors.

21#  Received voice channel messages counting correctable and uncorrectable
     errors.  When the command starts, the number of the command will be
     displayed in the upper right-hand corner of the display.  Entering a #
     key terminates the command and will display two three-digit numbers in
     display.  The first is the number of correctable errors and the second
     is the uncorrectable errors.

22#  Receive control channel messages counting word sync sequence.  When the
     command starts, the number of the command will be displayed in the upper
     right-hand corner of the display.  Entering a # key will terminate the
     command and display the number of word sync sequences in the display.

23#  Receive voice channel messages counting word sync sequences.  When the
     command starts, the number of the command will be displayed in the upper
     right-hand corner of the display.  Entering a # key will terminate the
     command and display the number of word sync sequences in the display.

24#  Receive control channel data and display the majority voted busy/idle
     bit.  0=idle  1=busy

25x# SAT On         When                        x=0, SAT=5970HZ
						x=1, SAT=6000HZ
						x=2, SAT=6030HZ

26#  SAT Off

27#  Transmit Data  (Transmits continuous control channel data.  All words
     will be "FF00AA55CC33."  When the command starts, '27' will be displayed
     in the right side of the display.  Entering a # key will terminate the
     command.  The transmitter de-keys when finished.)

28#  Activate the high tone (1150 Hz +/- 55 Hz)

29#  De-activate the high tone

30#  Activate the low tone (770 Hz +/- 40 Hz)

31#  De-activate the low tone

32#  Clear (Sets non-volatile memory to zeroes or factory default.  This
     command will affect all counters, all repertory memory including the last
     number called stack, and all user programmable features including the
     setting of System Registration.  It does not affect the ESN, NAM, phasing
     data, or lock code.  This takes a minute or so.  DO NOT TURN OFF THE
     TELEPHONE WHILE THIS IS SHOWING '32' ON THE DISPLAY.  WAIT UNTIL THE
     NORMAL SERVICE LEVEL DISPLAY RESUMES! [maybe a minute or so])

33x# Turn on DTMF for x  (1-9, *, 0, #, plus the single tones)
   Where x=1    697 Hz + 1209 Hz       14  1150 HZ (not used in cellular)
	   2    697 Hz + 1336 Hz       15  1209 Hz
	   3    697 Hz + 1477 Hz       16  1336 Hz
	   4    770 Hz + 1209 Hz       17  1477 Hz
	   5    770 Hz + 1336 Hz       18  1633 Hz (not used in cellular)
	   6    770 Hz + 1477 Hz       19  Turn DTMF off
	   7    852 Hz + 1209 Hz       20  2087 Hz
	   8    852 Hz + 1336 Hz       21  2308 Hz
	   9    852 Hz + 1477 Hz       22  2553 Hz (not used in cellular)
	   *    941 Hz + 1209 Hz       23  Turn DTMF off
	   0    941 Hz + 1336 Hz       24  3428 Hz (not used in cellular)
	   #    941 Hz + 1477 Hz       25  3636 Hz (not used in cellular)
	  10    697 Hz                 26  4000 Hz (not used in cellular)
	  11    770 Hz                 27  3555 Hz (not used in cellular)
	  12    852 Hz                 28  4571 Hz (not used in cellular)
	  13    941 Hz                 29  Turn DTMF off

  Someone Please Check Out 24 thru 28 for accuracy.  I had weak equipment.

34#  Turn DTMF Off

35#  Display RSSI ("D" Series Portable Only)

     or

35x# Set Audio Path to x    x=0, V.S.P Microphone (Applies to mobiles only.)
			    x=1, Speaker
			    x=2, Alert
			    x=3, Handset
			    x=4, Mute
			    x=5, External Telephone (Applies to Portables Only)
			    x=6, External Handset (Applies to NEWER Portables)

36nnn# Scan (TDMA Telephones only.  Scans the primary control channels and
     attempts to decipher the forward data stream.  The display will show PASS1
     if the strongest control channel was accessed, PASS2 if the second
     strongest was accessed, and FAIL if no control channel could be accessed.)

     (nnn=Scan speed in milliseconds).  Tunes from channel 1 to 666 in order.
     Entering a * pauses the scan and displays current Channel Number and
     RSSI reading (AAA=Channel Number and BBB=RSSI Reading).  When scan speed
     is 300 milliseconds or greater, the current status is displayed during the
     scan; when less than 300 milliseconds the status is displayed only during
     pause.  Entering * during a pause causes the scan to resume.  Entering #
     aborts the scan and leaves the mobile tuned to the current channel.  During
     this command only the * and # keys are recognized.

     NOTE:  While I haven't heard from ONE single person that this has worked,
	    Motorola has continued to print this command in all the Technical
	    Training Books (including the January 96 edition).

37#  Sets Low Battery Threshold.  Usage: #37#x# where x is any number
     from 1 to 255.  If set to 1, the Low Battery indicator will come up
     when the phone is powered on.  If set to 255, it may never come up.

38#  Display ESN (Displays ESN in four steps, two hexadecimal digits at a time
     in a four digit display.  The decimal shows the address, 00 through 03 as
     the first two digits, and two digits of the ESN as the last two digits.
     Use the '*' to step through the entire hexadecimal ESN.)

     Compander OFF ("D" Series Portables)

     or

38#  SND-SNM.  Display shows AA BB.  Where AA=Address;BB=Data.  Send the SNM
     to the display.  All 32 bytes of the SNM will be displayed, one byte at
     a time.  The byte address will be displayed in the upper right-hand
     corner and the contents of that address will be displayed in the hex.
     The * key is used to step through the address similar to the SEND-NAM
     (18#) command.

39#  Compander ON ("D" Series Portables)

     or

39#  RCVSU.  Receive one control channel word.  When the word is received it
     is displayed in hex.  This command will be complete when a control channel
     word is received or when the # key is entered to abort the command.

40#  RCVVC.  Receive one voice channel word.  When the word is received it is
     displayed in hex.  This command will be complete when a voice channel
     word is received or when the # key is entered to abort the command.

41#  Enables Diversity (On F19CTA... Series only.)

42#  Disables Diversity (On F19CTA... Series only.)

43#  Disable Diversity
     USE T/R ANTENNA (On F19CTA... Series only.)
     USE R ANTENNA (On D.M.T./ Mini TAC)

44#  Disable Diversity
     USE R ANTENNA (On F19CTA... Series only.)
     USE T/R ANTENNA (On D.M.T./ Mini TAC)

45#  Display Current Receive Signal Strength Indicator (Displayed as a 3 digit
     decimal number) The strongest signal I have ever received was 179 and I
     was sitting directly below the tower WITHOUT an external antenna.

46#  Display Cumulative Call Timer

47x# Set RX Audio level to X
     (For F19CTA ...Series Transceivers)
				       X=0, Lowest Volume
				       X=6, Highest Volume
				       X=7, mute
				       Normal setting is 4.
     (For D.M.T./ Mini TAC Transceivers)
				       X=0, Lowest Volume
				       X=7, Highest Volume
				       Normal setting is 4.
     (For TDMA Transceivers and F09F... Series and Higher Portables)
				       X=0, Lowest Volume
				       X=15, Highest Volume
				       Normal setting is 2 to 4.  (On TDMA
				       Transceivers and Micro TAC portables,
				       settings 8 through 15 are for DTMF
				       applications only.)

48#  Side Tone On.  Use this command in conjunction with 350# to test the
     entire audio path in hands-free applications.

49#  Side Tone Off

50#  Maintenance data is transmitted and test results displayed:
     PASS=received data is correct
     FAIL 1=2second timeout, no data rec.
     FAIL 2=received data is incorrect

51#  Test of mobile where maintenance data is transmitted and looped back.
     Display is as follows:
     PASS=looped-back data is correct
     FAIL 1=2 second timeout, no looped-back data
     FAIL 2=looped-back data is incorrect

52x# SAT Phase Adjustment.  A decimal value that corresponds to phase shift
     compensation in 4.5 degree increments.  Compensation added to inherent
     phase shift in transceiver to achieve a total of 0 degrees phase shift.

     Do NOT enter any values except those shown below.

     0 degrees = 0          121.5 degrees = 59           243.0 degrees = 86
     4.5       = 1          126.0         = 60           247.5         = 87
     9.0       = 2          130.5         = 61           252.0         = 112
     13.5      = 3          135.0         = 62           256.5         = 113
     18.0      = 4          139.5         = 63           261.0         = 114
     22.5      = 5          144.0         = 40           265.5         = 115
     27.0      = 6          148.5         = 41           270.0         = 116
     31.5      = 7          153.0         = 42           274.5         = 117
     36.0      = 16         157.5         = 43           279.0         = 118
     40.5      = 17         162.0         = 44           283.5         = 119
     45.0      = 18         166.5         = 45           288.0         = 120
     49.5      = 19         171.0         = 46           292.5         = 121
     54.0      = 20         175.5         = 47           297.0         = 122
     58.5      = 21         180.0         = 64           301.5         = 123
     63.0      = 22         184.5         = 65           306.0         = 124
     67.5      = 23         189.0         = 66           310.5         = 125
     72.0      = 48         193.5         = 67           315.0         = 126
     76.5      = 49         198.0         = 68           319.5         = 127
     81.0      = 50         202.5         = 69           324.0         = 104
     85.5      = 51         207.0         = 70           328.5         = 105
     90.0      = 52         211.5         = 71           333.0         = 106
     94.5      = 53         216.0         = 80           337.5         = 107
     99.0      = 54         220.5         = 81           342.0         = 108
     103.5     = 55         225.0         = 82           346.5         = 109
     108.0     = 56         229.5         = 83           351.0         = 110
     112.5     = 57         234.0         = 84           355.5         = 111
     117.0     = 58         238.5         = 85           360.0         = 70

53#  Enable scrambler option, when equipped.

54#  Disable scrambler option, when equipped.

55#  Display/Program N.A.M. (Test Mode Programming)

     TEST MODE PROGRAMING:

     Assuming you have completed one of the above steps correctly the phone
     will wake up in test mode when you turn the power on.  When you first
     access test mode the phone's display will alternate between various status
     information that includes the received signal strength and channel number.
     The phone will operate normally in this mode.  You can now access Service
     Mode by pressing the # key, the display will clear and a ' will appear.
     Use the following procedure to program the phone:

     1.  Enter 55# to access programming mode.

     2.  The * key advances to the next step.  (NOTE that test mode programming
	 does NOT have step numbers, each time you press the * key the phone
	 will display the next data entry).

     3.  The CLR key will revert the display to the previously stored data.

     4.  The # key aborts programming at any time.

     5.  To complete programming you must scroll through ALL entries until a '
	 appears in the display.

     6.  Note that some entries contain more digits than can be displayed by the
	 phone, in this case only the last part of the data can be seen.

     TEST MODE PROGRAMING DATA: For AMPS and NAMPS Cellular Telephones

     STEP#    #OF DIGITS/RANGE    DESCRIPTION

     01       00000 - 32767       SYSTEM ID
     02       8 DIGIT BINARY      OPTION PROGRAMING, SEE NOTE 1 BELOW
     03       10 DIGITS           MIN (AREA CODE & TEL#)
     04       2 DIGITS            STATION CLASS MARK, SEE NOTE 2 BELOW
     05       2 DIGITS            ACCESS OVERLOAD CLASS
     06       2 DIGITS            GROUP ID (10 IN USA)
     07       6 DIGITS            SECURITY CODE
     08       3 DIGITS            UNLOCK CODE
     09       3 DIGITS            SERVICE LEVEL, SEE NOTE 3 BELOW
     10       8 DIGIT BINARY      OPTION PROGRAMING, SEE NOTE 4 BELOW
     11       8 DIGIT BINARY      OPTION PROGRAMING, SEE NOTE 5 BELOW
     12       0333 OR 0334        INITIAL PAGING CHANNEL
     13       0333                "A" SYSTEM IPCH
     14       0334                "B" SYSTEM IPCH
     15       3 DIGIT             NUMBER PAGING CHANNEL (021 IN USA)
     16       8 DIGIT BINARY      OPTION PROGRAMING, SEE NOTE 6 BELOW

     Steps 01 through 06 and 12 will repeat for NAM 2 if the second phone
     number bit has been enabled in step 11.

     TEST MODE PROGRAMING DATA: For TDMA Cellular Telephones

     STEP#    #OF DIGITS/RANGE    DESCRIPTION

     01       00000 - 32767       SYSTEM ID
     02       8 DIGIT BINARY      OPTION PROGRAMING, SEE NOTE 1 BELOW
     03       10 DIGITS           MIN (AREA CODE & TEL#)
     04       2 DIGITS            STATION CLASS MARK, SEE NOTE 2 BELOW
     05       2 DIGITS            ACCESS OVERLOAD CLASS
     06       2 DIGITS            GROUP ID (10 IN USA)
     07       6 DIGITS            SECURITY CODE
     08       3 DIGITS            LOCK CODE
     09       3 DIGITS            SERVICE LEVEL, SEE NOTE 3 BELOW
     10       8 DIGIT BINARY      OPTION PROGRAMING, SEE NOTE 4 BELOW
     11       8 DIGIT BINARY      OPTION PROGRAMING, SEE NOTE 5 BELOW
     12       0333 OR 0334        INITIAL PAGING CHANNEL
     13       0333                "A" SYSTEM IPCH
     14       0334                "B" SYSTEM IPCH
     15       3 DIGITS            DEDICATED PAGING CHANNELS (021 IN USA)
     16       3 DIGITS            SECONDARY INITIAL PAGING CHANNEL.  708 for
				  system A, 737 for system B.  Allows the TDMA
				  telephone to be assigned to a TDMA channel in
				  a call
     17       708                 SECONDARY INITIAL PAGING CHANNEL FOR SYSTEM A
     18       737                 SECONDARY INITIAL PAGING CHANNEL FOR SYSTEM B
     19       8 DIGITS            OPTION PROGRAMMING, SEE NOTE 6 BELOW

     NOTES:

     Take care with Motorola's use of "0" and "1".  Some options use "0" to
     enable, some use "1".

     These are eight digit binary fields used to select the following options:

     1.  (step 02 above, suggested entry is: 11101001 for "A" system, 10101001
	 for "B" sys)

	 Digit 1: Local use mark, 0 or 1.
	 Digit 2: Preferred system, 1=system A, 0=system B.
	 Digit 3: End to end (DTMF) dialing, 1 to enable.
	 Digit 4: Not used, enter 0. Formerly used for test mobile.
	 Digit 5: Repertory (speed) dialing, 1 to enable. (Not used in TDMA)
	 Digit 6: Auxiliary (horn) alert, 1 to enable.
	 Digit 7: Hands free (VSP) auto mute, 1 to enable (mutes outgoing hands
		  free audio until the MUTE key is pressed). (Not used in TDMA)
	 Digit 8: Min mark, 1 = Enabled.  NOT CHANGEABLE on series II or III.

     2.  Station Class Mark

	  SCM | 666 or 832 Ch. | VOX | Max Power
	 -----+----------------+-----+-----------
	   00 |      666       |  N  |   3.0 W
	   01 |      666       |  N  |   1.2 W
	   02 |      666       |  N  |   0.6 W
	   03 |                |     |
	   04 |      666       |  Y  |   3.0 W
	   05 |      666       |  Y  |   1.2 W
	   06 |      666       |  Y  |   0.6 W
	   07 |                |     |
	   08 |      832       |  N  |   3.0 W
	   09 |      832       |  N  |   1.2 W
	   10 |      832       |  N  |   0.6 W
	   11 |                |     |
	   12 |      832       |  Y  |   3.0 W
	   13 |      832       |  Y  |   1.2 W
	   14 |      832       |  Y  |   0.6 W
	   15 |                |     |

     3.  Service Level Codes:

	 001   The telephone will only dial numbers in memory locations 01, 02
	       and 03.  No keypad entries or memory storage is possible.
	       Restrict ALL outgoing calls by clearing locations 01, 02, and 03
	       and place the phone in servicing level 001.  In some phones this
	       applies to memory locations 01 - 10.
	 002   The telephone will dial only numbers from memory locations.  The
	       keypad is disabled and super speed dialing is not enabled.
	 003   Keypad dial only; no memory recall allowed.
	 004   Unlimited keypad and memory dialing.  (DEFAULT)
	 005   Seven-digit dialing only
	 006   Full keypad and memory dialing, but memory locations 1 through
	       10 cannot be changed.
	 007   The phone will dial only from as many as 50 programmable memory
	       locations

     4.  (step 10 above, suggested entry is: 00000100)

	 Digits 1 - 3: Not used in USA, enter 0.
	 Digit 4: Extended Field.  When enabled, the telephone will scan
		  more than 32 paging channels.  Not used in USA, 0 to disable
	 Digit 5: Single system scan, 1 to enable (scan A or B system only,
		  determined by bit 2 of step 02. Set to "0" to allow user the
		  option).
	 Digit 6: Super speed dial, 1 to enable (pressing N, or NN SND will
		  dial the number stored in memory location NN).
	 Digit 7: User selectable service level, 0 to enable (allows user to
		  set long distance/memory access dialing restrictions).
	 Digit 8: Lock function, 0 to enable (allows user to lock/un-lock the
		  phone, if this is set to 1 the phone can not be locked).

     5.  (step 11 above, suggested entry is: 00000000)

	 Digit 1: Handset programming, 0 to enable (allows access to programming
		  mode without having to enter test mode).
	 Digit 2: Second phone number (not all phones), 1 to enable.
	 Digit 3: Call timer access, 0 to enable. (Not used in TDMA)
	 Digit 4: Auto system busy redial, 0 to enable.
	 Digit 5: Internal Speaker disable, 1 to enable (use with select VSP
		  units only, do not use with 2000 series mobiles).
	 Digit 6: IMTS/Cellular, 1 to enable (rarely used).
	 Digit 7: User selectable system registration, 0 to enable.
	 Digit 8: Dual antenna (diversity), 1 to enable.

     6.  (step 16 and 19 above, suggested entry is: 0011010 for portable and 0011011
	 for mobile units)

	 Digit 1: Enhanced Scan, when enabled, four strongest signalling
		  channels are scanned instead of two. 1=enabled, 0-disabled.
	 Digit 2: Cellular Connection, used only in series II phones if a
		  series I cellular connection is used with a series II.
		  0=series II, 1=series I, 0 for ALL TDMA PHONES
	 Digit 3: Continuous DTMF, 1 to enable (software version 8735 and later)
	 Digit 4: Transportable Internal Ringer/Speaker.  When set to 0, audio
		  is routed to the external speaker of the transportable; 1
		  routes it to the handset.
	 Digit 5: 8 hour time-out, 0 to enable (software version 8735 and later)
	 Digit 6: Not used, 0 only.
	 Digit 7: Failed page indicator, 0 to enable (phone beeps when an
		  incoming call is detected but signal conditions prevent
		  completion of the call).
	 Digit 8: Portable scan, 0 for portable, 1 for mobile units.

56#  Illumination Diagnostic.  Lights up all lights (except the green in use
     light) and displays all "8"'s.  The phone is also muted until repowered.

57x# Call Processing Mode
		   x=0, AMPS
		   x=1, NAMPS
		   x=2-4, RESERVED
		   x=5, TDMA signalling
		   x=6, TDMA signalling with loopback before decoding
		   x=7, TDMA signalling with loopback voice after decoding
		   x=8, TDMA signalling with loopback FACCH after decoding
		   x=9, TDMA forced synchronization

58#  Compander On (Audio compressor and expander) (See 39#)

59#  Compander Off (Audio compressor and expander) (See 38#)

60#  no function

61#  ESN Transfer (For Series I D.M.T./Mini TAC only)

62#  Turn On Ringer Audio Path

63#  Turn Off Ringer Audio Path

64#  ? Does something, doesn't display anything

65#  ? Does something, doesn't display anything

66#  Identity Transfer (Series II Trancvrs and later mobiles, F09HG...,
     F09HL..., F09HY..., F09HR..., F09LF..., F09NF..., F09PY..., F09QY...,
     F09RY..., and most retail portables shipping prior to April 1, 1995.)
     Does the actual transfer of the ESN and NAM info.  See the 80x# command.

67#  Displays two 3 digit numbers.  If you keep entering this command
     repeatedly, the first number will constantly change, the second won't
     (as far as I have seen).

68#  Display FLEX and Model Information

69#  Used with 66# for Identity Transfer.  In models shipped without the 66#
     command, this is used with 80x# instead.  Reads NAM information, repertory
     memory, and C-Scan ID SID's from old phone.

70#  Abbreviated field transmitter audio deviation command, for transceivers
     with FCC ID ABZ89FT5668.

71#  Abbreviated field power adjustment command, for transceivers with FCC ID
     ABZ89FT5668.

72#  Field audio phasing commands.  The left side of the display should read
     "00" followed by a two digit number.  The "00" indicates the first
     programming step.  If you press the *, the 00 changes to 01 and so on until
     08.  The "06" and "0A" are used to change the audio level (to change:
     press the volume up or down keys).  Other registers...don't know.

73#  Field power adjustment command.

75#  Display ESN (Displays ESN in four steps, two decimal digits at a time
     in a three digit display.  The decimal shows the address, 0 through 3 as
     the first digit, and two digits of the ESN as the last two digits.
     Use the '*' to step through the entire hexadecimal ESN.)

     38#                  75#

     00-D4              0       30
     01-25              1       16
     02-D4              2       13
     03-1E              3       54309


80x# Current Identity Transfer Procedure.  (Available in telephones shipping
     after April 1, 1995.)  This does NOT transfer the ESN.

		   x=0, Transfers NAM information (On TDMA telephones, this
			command also transfers C-Scan SID's.)
		   x=1, Transfers repertory memory (names & telephone numbers
			in memory.)
		   x=2, Transfers C-Scan SID's on analog telephones (Not
			available on TDMA telephones.)

NOTES:  As new fones come out, more commands are added/deleted as needed.
	The majority of these commands were figured using VERY old software
	versions.  Some commands won't work on some phones.  If you find a
	command that does something, please inform me as well as the software
	version number of the phone it was discovered on.

--------------------------------------------------------------------------------

* NEW SECTION *

	      COMMANDS THAT DO SOMETHING BUT I DON'T KNOW WHAT!!!

74#

76#

77#

78#

99#

If you have any insight to these commands or if you have any more to add to the
list, please email me promptly.  Thank you.


G*S*M***I*N*F*O***A*N*D***T*E*S*T***M*O*D*E********************S*E*C*T*I*O*N***5

Thanks to Janus Krarup (jckrarup@post1.com    http://www.ibt.dk/morten/friends/)
for all the information in this section.  His web page has all of this
information (and more) and is continually updated.  It's also offered in Italian
and will be available soon in Czech.

TESTMODE for GSM PHONES:

Start with the sequence:

			  Testmode
			  Command#
			     |
			     |
[pause] [pause] [pause] [1] [1] [3] [pause] [1] [pause] [ok] [MENU]    (pause is
accomplished by holding down the [*] key until box appears).

This accomplishes the editing/viewing of the Engineer Field Options.  By
substituting different numbers for the [1] [1] [3], many more test mode
commands and functions are available.  (see below for an almost complete list)

After pressing [MENU], scroll until the new option appears.  Pressing [OK] will
then reveal 3 new options:

ACTIVE CELL: Displays Active Channel and lets you scroll through: RxLev, RxLevAM,
	     NCC, BCC, MSTxPwr, and C1.

	     During a call you can see: RxLev, RxLevFull, RxLevSub, RxQualFul,
	     RxQualSub, Timeslot, TimeAdv, and PwrLev.

	     The active channel may read "Hopping" during a call.

	     When establishing a network connection you can see what SDCCH
	     (Standalone Dedicated Control CHannel) the negotiation takes place
	     on.

ADJACENT CELLS: Lets you scroll through the adjacent cells (1-6) and view their
		channel allocations.

SYSTEM PARAMETERS: Displays the following: Combined, AcsClas, MCC, MNC, LAC,
		   CellID, T3212, BS-PA-MFRM, and XZQTY.

		   During a call you can see: Combined, DTX, MCC, MNC, LAC, and
		   CellID.

--------------------------------------------------------------------------------

Key To The Readouts:

Combined: Haven't got a clue.  The two Danish operators has OFF and Swedish
	  Comviq has ON.

RxLev: The strength of the received signal (in dBm), normally between -55 and
       -90  -  the signal drops at RxLevAm

      When comparing RxLev's, remember the logarithmic nature of the dB scale and
      that the signal intensity decays by a factor of 4 when the distance from
      the BST is doubled (assuming line of sight to the BST, the signal will
      drop 6 db when the distance is doubled.)

RxLevAm: Receive signal strength cut off point (around -100 dBm and -110 dBm).

BCC: Broadcast Color Code (0 through 7)

NCC: Network Color Code (0 through 7)

MSTxPwr: BTS transmit power in dBm (see notes on power control)

C1: Measurement of the signal quality (bit failure).  A forced handoff will be
    made if C1<0.  ( I have seen C1 as high as 039).  This value is reported
    from MS back to the BSC which decides when to make a handoff.

RxLevFull: C1 value with continuous transmission from tower.

RxLevSub: C1 value with discontinuous transmission from tower.

RxQualFull: Bit error rate with continuous transmission from tower.

RxQualSub: Bit error rate with discontinuous transmission from tower.

Timeslot: The current timeslot (0 through 7).  TDMA allows eight channels to be
	  accommodated on a single RF carrier.

TimeAdv: Timing advance (0 through 63).  TA can be multiplied with 547 meters
	 (35 km/64 TA steps) to get the distance to the BTS.

PwrLev: Shows which power step/level the phone is transmitting at (see section
	below on power control)

DTX: Discontinuous transmission, a feature used to save battery and reduce
     network traffic.

MCC: Mobile Country Code.  238=Denmark

MNC: Mobile Network Code.  1=Tele Denmark, 2=Sonofon (these are the ones for
     the MCC 238).

LAC: Local Area Code.  (not sure, but I could imagine it being the BSC
     identity).

CellID: A unique number that identifies the cell.  (BTS identity)

T3212: Time between periodic network updates.  Appears to be fixed (010 for
       Tele Denmark and 050 for Sonofon).

--------------------------------------------------------------------------------

POWER CONTROL:

To minimize co-channel interference and to conserve power, both the mobiles and
the Base Transceiver Stations operate at the lowest power level that will
maintain an acceptable signal quality.  Power levels can be stepped up or down
in steps of 2 db from the peak power for the class down to a minimum of 13 dBm
(20 milliwatts).

Use this table to translate between dBm, PwrLev, and Power:
	   +--+----+--+---+---+--+---+---+---+----+---+----+----+----+----+----+
Power Level| 0|   1| 2|  3|  4| 5|  6|  7|  8|  9 | 10|  11|  12|  13|  14|  15|
	   +--+----+--+---+---+--+---+---+---+----+---+----+----+----+----+----+
	dBm|43|  41|39| 37| 35|33| 31| 29| 27|  25| 23|  21|  19|  17|  15|  13|
	   +--+----+--+---+---+--+---+---+---+----+---+----+----+----+----+----+
      Watts|16|12.8| 8|5.2|3.2| 2|1.3|0.8|0.5|0.32|0.2|0.13|0.08|0.05|0.03|0.02|
	   +--+----+--+---+---+--+---+---+---+----+---+----+----+----+----+----+

If you can help out with deciphering the readouts, additional sequences or
corrections please feel free to contact Janus Krarup at jckrarup@post1.com.

--------------------------------------------------------------------------------

Security Codes on the GSM phones:

The phones are protected by two codes:

The UNLOCK code which consists of 4 digits (default 1234)

This is changed by typing MENU 51 and providing the security code.  You can type
in wrong codes until you hit the right one.

The SECURITY code which consists of 6 digits (default 000000)

This is changed by typing MENU 54 and providing the old code.  Again, you can
keep hitting bogus codes all day until you get the right one (hope you got
some time to kill).

The SIM card is protected by 2 codes:

The PIN code (Personal Identification Number) which consists of 4 to 8 digits.

The PIN code can only be typed in wrong 3 times (you heard right...3).  After
this the SIM card will be blocked until the PUK code is used.  The PIN code is
user definable.  It can be changed by providing the old PIN code or the PUK
code.  There is a menu for changing the PIN code by providing the old one, but
you can also type **04* in order to do so.  To enter a whole new PIN on a
blocked card or without knowing the old PIN, you need to use **05* PUK (OK)
NEWPIN (OK) NEWPIN (OK)

The PUK code (Personal Unblocking Key) consists of 8 digits.

This is set by the network provider and can not be changed.  If entered wrongly
10 times, the card will become permanently blocked and will need to be replaced.

--------------------------------------------------------------------------------

Undocumented Menu shortcuts (7500, 8200, and maybe the 5200 and 7200)

Menu + XX

11  Status Review
13  Available networks
14  Preferred networks

21  Incoming call alert
22  Select keypad tones
25  Require SIM card PIN
26  Language selection

32  Repetitive timer
33  Single alert timer
34  Show meter during calls
35  Resettable call meters
36  Resettable call meters
37  Set call cost rates
38  Reset all meters

41  Keypad dialing (call restrictions)
43  Restrict incoming calls
44  Phone number length

51  Change unlock code
52  Master reset
53  Master clear
54  New security code
55  Automatic lock

63  Battery saving mode

--------------------------------------------------------------------------------

Test Mode Functions:

3   MENU-phone book
4   MENU-messages
5   mute on/off (menu during call)
6   MENU-Call related features
7   MENU-"arrows"
8   select phone line
9   last ten calls
10  restrict my phone number
11  call diverting
12  divert when available
13  Detailed diverting
14  Divert voice calls
15  Divert ALL voice calls
16  If Busy
17  If no answer
18  If not reachable
19  Divert fax calls
20  Divert Data calls
21  Cancel all diverting
22  Call waiting
23  Call barring
24  Bar outgoing calls
25  Bar incoming calls
26  Change Barr password
27  Call restrictions
28  Restrict incoming calls
29  Phone number length
30  Keypad dialing
31  Call voicemail
32  Received messages
33  Cell broadcast
34  Message settings
35  Message alert tone
36  Voicemail number
37  Incoming call alert
38  No alert
39  Vibrate only
40  Adjust ring volume
41  Lock now
42  Automatic lock
43  Change unlock code
44  Require SIM card PIN
45  Change SIM PIN code
46  New security code
47  Extended menus
48  Language selection
49  Automatic (Language Selection)_
50  Change greeting
51  Battery saving mode
52  Select keypad tones
53  Phone status
54  Status review
55  Master reset
56  Master clear
57  Available networks
58  Network search
59  Registration preferences
60  Frequency of search
61  Preferred networks
62  Add network to list
63  Show list of networks
64  Find new network
65  Show last call
66  Resettable call timers
67  Set audible call timers
68  Single alert timers
69  Repetitive timer
70  **1 = register write lock!!!
71  Show meter during calls
72  Set meter format
73  Set call cost rates
74  Lifetime meter

81  Find entry by name
82  Find entry by location
83  Show services
84  Enter my phone number
85  Show my phone number
86  Add entry
87  Check phone capacity
88  Check SIM capacity
89  Prevent access
90  Edit name (my phone number)
91  Edit number (my phone number)
92  MENU - Call related features
93  MENU - Phone setup
94  MENU - Network selection
95  MENU - Call meters

99  Periodic search
100 Continuous search
101 Slow search
102 Medium search
103 Fast search
104 MENU - Phonebook
105 MENU - Phonebook
106 MENU - Messages
107 MENU - Messages
108 Copy SIM memory

110 Edit number (direct dial key)
111 Edit name (direct dial key)
112 Direct dial key
113 MENU - Eng Field Options

126 erase all numbers (last 10)

ATTENTION:  These are but a few of the possible commands.  There are 1000
	    possibilities!  Please attempt to find more.  And if you do, Email
	    me to keep this list as accurate as possible.

I know that an add-on setup menu exists.  This is used when the phone is
connected to a hands-free car kit.

The HF-setup menu should contain 5 choices: turn off radio/aut. HF answer/aut.
HF/security timer/external alert.

If you have an HF kit, please help me to complete the list (I suspect the menus
to have the numbers from 75 to 80).

Again all correspondence about this entire GSM section should be addressed to
jckrarup@post1.com.  He's the GSM guy.  I've never used a GSM phone.  -MikEY


H*A*C*K*I*N*G***T*H*E***F*O*V*C********************************S*E*C*T*I*O*N***6

Note:  This is NOT my hack.  Thanks to Patrk@delphi.com for this addition.


		   HACKING THE FOVC


Problem:  When listening to something interesting (a conversation),
just when that sexy sounding horny broad begins to give her
phone number to some lucky guy, HANDOFF!!! then static... DAMN!

Trick:    Hack the FOVC.

    a quick definition:  FOVC  = FOward Voice Channel
			 FOCC  = FOward Control Channel
			 REVC  = REverse Voice Channel
			 RECC  = REverse Control Channel

As the phone travels through cells, the FOVC is where the tower tells
the phone to adjust power levels for the current cell or to change to
a new channel for use in the new cell. This info can be hacked apart.
So. When you've found a good conversation, don't be lazy! Enter 40#!
This makes the phone listen for commands on the voice channel
(embedded in the audio portion- you can hear it as a "bump" sound). It
will just sit there and the display will read '40' , but the
conversation will still be audible.  Now when the phone receives a
FOVC command (a 40 bit sequence) data will flow across the display, in
hex format, and stop. Listen to the phone, if the conversation is
still there, then the command was only to adjust power levels. If the
conversation is gone, then its a handoff. If you only got a power
adjustment command just press # or clr,  which ever gets you back to
the ' prompt. Enter 40# and keep listening. You can also use the # key
to cancel the 40# command, if you want to change channels or something.

If it was a handoff, its time for some quick math. You have to convert
some of the numbers to binary, and then to decimal. I don't know how
many characters your phone's display will show. Mine only shows the
last seven of the ten hex digits. Count left from the end 6 digits.
Write down that digit and the next two on a piece of paper, i.e.:


    ???j16djjj    j=junk numbers  (hex numbers range from 0-9,a-f)
    / \
    these are lost due to scrolling

       write down  16d then convert it to a binary string:

       1 = 0001
       6 = 0110
       d = 1101    (d=13)

       now you have a binary string like this:  000101101101
       throw away the first 2 bits and get:       0101101101
       convert this to decimal and get:                  365


365 is the new channel the conversation has moved to! Enter 110365#
and voila! You too, can hear the horny babe's phone number!

Don't forget to enter 40# again, as the call may be moving quickly
through cells ( small cells or freeway driving ) or the call can get
bounced around by the tower for cell traffic purposes.

Here's one more example of the hex>binary>decimal conversion.

	???j5aejjj

	5  =  0101
	a  =  1010
	e  =  1110

	full string        = 010110101110
	truncate 2 msb     =   0110101110
	convert to decimal =          430

 
R*E*A*D*I*N*G***T*H*E***S*I*D**********************************S*E*C*T*I*O*N***7

READING THE SID by Doctor Who (drwho@l0pht.com)

The SID (System IDentification) of a control channel can be determined using
the test mode of the Motorola cellular phone.  This document assumes the
reader understands cellular technology in general, and how to access
Motorola's test mode in specific.

Tune the phone to the desired control channel with 11xxxx# where xxxx is the
channel number.  Hit 39# to receive one control channel word.  One should
appear in less than two seconds, filling up all ten digits on the display with
hexadecimal digits.  Do this repeatedly until one is found with the correct
pattern.  Digit places start at the left hand side and go to the right.

The first digit should be C,D,E, or F.  This letter can be used to determine
the DCC/SAT of the cell.  A "C" is SAT 0, D is 1, E is 2, and F is 3.  Ignore
digits 8,9, and 10.  They are parity bytes.  Digit 7 should be "6" or "E",
though I have never found it to be other than "E".  The hexadecimal value of
represented by digits 2 through 5 is then divided by two, and then 1 added if
the carrier as an "A" side, "non-wireline" carrier.  The result is the system
ID.

for example:

E00388EA08

E means this cell has an SAT/DCC of 3.  The A08 is ignored.  The E to the left
of it is proper and normal, so this is the right kind of message.  Ignore the
8 in position 6, that is just to the left E.  0038 in hexadecimal translates
((3*16=48)+8) to 56.  56/2=28.  Looking up System ID 28 on my chart indicates
Nynex in Boston.  This is correct.

Please be aware that the two SID charts I have seen around the net are very
outdated.  I have a more recent version on paper which I may eventually type
in, when I have the time and energy.

The methods used above are only a very crude way to do what could be done much
more efficiently by computer.  I am sure that programs will be written to do
exactly this, but I am holding off until I have thoroughly hacked the meaning
of all these types of message before writing such a program.  I am also
contemplating the design of a cable to replace the handset, running from the
25 pin connector on the side of my bag phone to a computer.

---------=> Doctor Who <=--------


P*H*O*N*E***P*I*N*-*O*U*T*S************************************S*E*C*T*I*O*N***8

Before going into the cable specs, here are the pin-outs to all phones as of
now (in the US).  A very special thanks go to Motorola for faxing me the new
Ultra Classic II pin-outs!

--------------------------------------------------------------------------------

15 pin cable pinouts

 PIN    DESIGNATION/FUNCTION
  1     Battery A+, red wire
  2     Transmit Audio / ON-OFF Function, a shared line between Audio (AC) and
	ground.  This line will toggle the ON/OFF status of the telephone.
  3     Ground (A+ return), black wire
  4     Ignition Sense Lead, green with a black tracer
  5     Receiver Audio (RX High), to handset connector pin 8
  6     Regulated +9.5 volts, to handset connector pin 2
  7     T-Data, one of the 3-wire bus lines, to handset connector pin 3
  8     C-Data, one of the 3-wire bus lines, to handset connector pin 4
  9     Digital Hands-Free Microphone / Manual Test.  When the pin is grounded,
	which can be done by shorting the two connectors of the Hands-Free
	microphone, the unit is enabled to work in TEST MODE.
  10    R-Data, one of the 3-wire bus lines, to handset connector pin 5
  11    Handset Logic Ground, to handset connector pin 1
  12    Speaker High \
		      | -> Only on SKN4279A and SKN4277A
  13    Speaker Low  /
  14    Handset Audio Ground, to handset connector pin 6
  15    Auxiliary Alert, yellow lead with a black tracer, used to blow the horn
	or flash the headlights.  Provides a ground for the relay; maximum
	current is 1/2 amp.  It is  *N O T*  recommended that this circuit be
	used to drive the horn or headlights directly.

--------------------------------------------------------------------------------

25 pin cable pinouts (series 2 and 3 transceivers)

 PIN    DESIGNATION/FUNCTION
  1     Transmit Audio/ON - OFF Function
  2     Mobile/Transportable Select Line
  3     Ground (A + return), one of 2 black wires.  Both are required for proper
	operation
  4     Battery A +, one of 2 red wires. Both are required for proper operation.
  5     Ignition Sense Lead, green with red tracer
  6     Receiver audio to handset (RX High), pin 8 on the handset connector
  7     Ground
  8     Regulated +9.5 volts to handset, pin 2 on handset connector
  9     Ground
  10    Auxiliary Alert, yellow with black tracer, used to blow the horn or
	flash the headlights.  Provides a ground function. NOTE: 1/2 amps
	maximum current.  The recommended method is to drive a relay
	(e.g. MOT 59K813674).  Ignition Sense, pin 5, must be low for this
	function to work.
  11    T-Data, one of the 3-wire bus lines, to pin 3 of the handset connector
  12    C-Data, one of the 3-wire bus lines, to pin 4 of the handset connector
  13    Ground
  14    Transmit Audio Shield
  15    Transmit Audio
  16    Battery A+, one of two red wires. Both are required for proper operation
  17    Ground, one of two black wires. Both are required for proper operation
  18    R-Data, one of the 3-wire bus lines, to pin 5 of the handset connector
  19    Receiver audio to external speaker
  20    Ground for receiver audio (shield) to external speaker
  21    Manual test line.  When connected to ground, puts phone in test mode
  22    Ground
  23    Handset logic ground, to handset connector pin 1
  24    Handset audio ground, to handset connector pin 6
  25    Accessory ground, to external speaker

--------------------------------------------------------------------------------

OEM 32 pin cable pinouts        16 15 14 13 12 11 10  9  8  7  6  5  4  3  2  1
				+----------------------------------------------+
Note: Looking into connector  C |*  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *|
  on the transceiver with the  D |*  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *|
  antenna port down.            +----------------------------------------------+

Pin#  Designation/Function Row C         Pin#  Designation/Function Row D
  1  Battery A+                            1  Not Used
  2  Ignition Sense                        2  Antenna Drive (for power antenna)
  3  Status Display Control                3  Not Used
  4  Not Used                              4  Auxiliary Alert, used to blow the
					      horn or flash the headlights
					      through a relay
  5  Ground (A+ Return)                    5  Not Used
  6  GM Proprietary Serial Data Bus         6  GM proprietary serial bus
  7  Audio Ground, from GM Audio bus to    7  Audio Ground (not connected)
     telephone
  8  Low level audio, from telephone to GM 8  Low Level Audio (not connected)
     Audio bus
  9  Not used                              9  Manual Test Line; when grounded
					      this line enables TEST MODE
  10 Not used                              10 RX High
  11 Mobile / Transportable select line    11 Ground (TX Shield)
  12 Handset Logic Ground                  12 Regulated +9.5 volts
  13 T-Data, one of the 3-wire bus lines   13 C-Data, one of the 3-wire bus lines
  14 R-Data, one of the 3-wire bus lines   14 Audio Ground
  15 TX High / ON-OFF                      15 Ground (Rx Shield)
  16 VSP Microphone High                   16 VSP Microphone Ground

--------------------------------------------------------------------------------

Pinouts for the Motorola 8000 brick phone - "N" series

 numbering starts on top left         1  2  3  *  4  5  6
				      7  8  9  *  10 11 12
 PIN    SIGNAL
  *     GROUND
  1     logic ground
  2     not used
  3     audio in to phone
  4     audio out (and on/off toggle)
  5     4.75 Bias
  6     Manual test line
  7     Ground for audio signals (common)
  8     TRU data line
  9     not used
  10    CMP data line
  11    RTN data line
  12    ignition sense

--------------------------------------------------------------------------------

CVC BLOCK

 [ 1] [ 2] [ 3]   [ 4] [ 5] [ 6]

 [ 7] [ 8] [ 9]   [10] [11] [12]

 1   VSP Enable        7   GROUND
 2   SPKR Enable       8   S TRU
 3   TX HI on/off      9   AUX Alert
 4   RX HI             10  S CMP
 5   RX HI OPT         11  S RTN
 6   MAN TEST          12  IGN

--------------------------------------------------------------------------------

Flip Fones and all fones using the dpc/pt flip cable

						   J3 Pin  Function
 1   2   3   4   5   6   7   8           + G -       1     Logic Ground
 |   |   |   |   |   |   |   |           | | |       2     Ext. 7.5V
						     3     TRU
						     4     CMP
  (looking at back of phone with battery removed)    5     RTN
						     6     Audio Ground
						     7     RX Audio OUT (spkr)
						     8     TX Audio IN (mic)

--------------------------------------------------------------------------------

New External Connector for the Ultra Classic II CVC Pinblocks
		      \
		       \
			\
			 \
      []            []    \      Pin   Designation/Function
\                          \
  +-------------------------+     1    Regulated 8 volts
  |     12 10  8  6  4  2   |     3    ext. switched A+ enable
  |      -  -  -  -  -  -   |     5    ext. spkr/mic enable
  | O                       |     7    TX hi - on/off
  |      -  -  -  -  -  -   |     9    T Data
\ |     11  9  7  5  3  1   |    11    R Data
  +-------------------------+
		   |              2    Audio Ground
	    PHONE /               4    manual test
				  6    ignition / charger B+
				  8    RX hi
				 10    C Data
				 12    logic ground


C*A*B*L*E***S*P*E*C*S******************************************S*E*C*T*I*O*N***9

OK OK OK.  Here are the cable specs.  They are 100% correct.  Of course I
wouldn't know because these are for information purposes only.  I have been
told however by VERY reliable sources that they are guaranteed, 100%, GRADE-A,
correct.  If they don't work for you, you did something wrong.

--------------------------------------------------------------------------------

    Cable Instructions for the bag phones       (thanks Jakey)


phone (female 25 pin)      computer (male 25 pin) (parallel port)

18 ----------------------- 1
21 ----------------------- 2
1 ------------------------ 4   Below are 10K ohm resistors
12 ----------------------- 12 ----/\/\/----.
11 ----------------------- 13 ----/\/\/----+
4,5,8 -------------------------------------'
2,3,17,20----------------- 18 --- Ground/black wire (-12 Volts)
16 ------------------------------ Positive/yellow wire (+12 volts)

By the way, Jakey told me to remind you that the handset can NOT be plugged in
while this cable is hooked up.

--------------------------------------------------------------------------------

		 Motorola Cellphone cable construction  for flips
		 -------------------------------------


  DB25        FLIP                                  Battery Eliminator cable
  ----        ----                                  attachment pins up:
    1(--------)4
						      --------=
    2(--|<----)Jump this line to the Center                1  =
	       Pin on the back of phone.              --------=
							      =
    4(--|<----)1   "|<" is the IN4001 diode.          --------=
							      =
   12(--------)5                                      --------=
							   4  =  -->To phone
   13(--------)6                                      --------=
							   5  =
18-25(-+------)8                                      --------=
       |                                                   6  =
       |    +-)7                                      --------=
       |    |                                              7* =
       |    |                                         --------=
       |    |                                              8* =
      NeG  PoS ---Cig adapter                         --------=


DB25 Male                Phone                     Power Connector
						    (see Note 1)
1-To phone pin 4         1-DB25 pin 4(see note 2)  Gnd-To Db25 Pins 18-25 and
2-To Phone test lead     2-NC                          Phone pin 8
  (see note 2)
3-NC                     3-NC                      Tip-To phone pin 7
4-To phone pin 1         4-To DB25 pin 1
  (see note 2)
5-NC                     5-To DB25 pin 12
6-NC                     6-To DB25 pin 13
7-NC                     7-To tip on power connector
8-NC                     8-GND
9-NC                     Test Lead-To DB25 pin 2 (See note 2)
10-NC
11-NC
12-To Phone pin 5
13-To Phone pin 6
14-NC
15-NC
16-NC
17-NC
18-GND \
19-GND |
20-GND |
21-GND |--Conn together to GND on 12v conn
22-GND |  And pin 8 on phone plug
23-GND |
24-GND |
25-GND /

  NOTE 1:
     The power adapter on the cable is 12 volt input but is a regulated
     7.95 volts out. DO NOT connect 12 volts between pins 7 and 8 on the
     phone connector.

  NOTE 2:
			 |  /|
	  DB25 Pin 4-----| < |------Phone pin 1
			 |  \|

			 |  /|
	  DB25 Pin 2-----| < |------Phone test lead
			 |  \|


--------------------------------------------------------------------------------

Motorola Transceivers
_____________________
4500x,4800x,6800x,Etc.
______________________
Female 25 Pin                                Male 25 Pin
D-Connector                                  D-connector
To transceiver                               To P.C.Parallel Port
	  Pin                                     Pin
	  1._____________________________________  4.
	  2._____________________________________ 18.
				     ___10k______ 13.
				    /
  ______4+5._______________________/____10K______ 12.
 |       12.____________________________________/
 |       11._____________________________________ 13.
 |       18._____________________________________  1.
 |       21._____________________________________  2.
 |    ___14+17+20+23.____________________________ 18.
 |    |
 |    |___ -ve
 |
 |________ +ve 9 Volt

--------------------------------------------------------------------------------

 Motorola 8500x 8800x(early type)
 ________________________________

 25 Pin D-plug(P.C.lpt1)           Phone Back(battery removed)

 Pin          Diodes         []    []    []      []    []    []
  3.--orange-|<1n4001---------------------/       /           /
  4.--blue---|<1n4001----------------------------/           /
  2.--red----|<1n4001---------------------------------------/

 19.-------------\
 20.-----------\ |            []    []    []     []     []    []
 18.--black----+-+------------/     /            /      /
 13.--yellow-----------------------/            /      /
 12.--brown------------------------------------/      /
  1.--gray-------------------------------------------/



			      []                              []
			  -8 to -12V.                     +8 to =12V.
 NOTE Diode protocol: Cathode---|<1n4001---Anode


C*H*A*N*N*E*L***N*U*M*B**E*R***V*S*.***F*R*E*Q*U*E*N*C*Y*****S*E*C*T*I*O*N***1*0

Frequency Range for 666 Channels:      Reverse (Mobile TX) 825.020 - 844.990 MHz
				       Forward (Mobile RX) 870.020 - 889.990 MHz

Frequency Range for 832 and 2412 Channels:
				       Reverse (Mobile TX) 824.030 - 848.980 MHz
				       Forward (Mobile RX) 869.030 - 893.980 MHz

Frequency Calculation for Channels 1-799:
		  Reverse (Mobile TX) Frequency = 825.00 MHz + (Ch.# X .030 MHz)
		  Forward (Mobile RX) Frequency = 870.00 MHz + (Ch.# X .030 MHz)

Frequency Calculation for Channels 991-1023:
	 Reverse (Mobile TX) Frequency = 825.00 MHz - [.030 MHz X (1023 - Ch.#)]
	 Forward (Mobile RX) Frequency = 870.00 MHz - [.030 MHz X (1023 - Ch.#)]

To determine the center frequency of an associated NAMPS sub-channel in these
formulas, subtract 10 kHz from the result for the low sub-channel, leave the
result as is for the center sub-channel, and add 10 kHz to the result for the
high sub-channel.

--------------------------------------------------------------------------------

The following text I took from the Poisoned Pen BBS (Hi guys).  Thanks Jakey
for taking the time to decipher all of this shit.  As far as I know, with
the exception of a post on #cellular and the upload to Poisoned Pen, there is
nothing in print with this compilation.  Again, special thanks go to Jakey
(jbs@mcs.net) for the long, seemingly endless work.


CELLULAR PHONE FREQUENCIES AND MOTOROLA
TEST MODE NUMERIC CODES.
( Motorola test mode channel numbers )
( are for use in Motorola test mode  )
( with function 11xxxx#              )
( All frequencies in Megahertz FM    )
Lower Set (1-666)

Tower Freq.  Mobile Freq.    11xxxx# Channel

Tx  870.03   Rx  825.03  Chan  0001  #1
Tx  870.06   Rx  825.06  Chan  0002  #2
Tx  870.09   Rx  825.09  Chan  0003  #3
Tx  870.12   Rx  825.12  Chan  0004  #4
Tx  870.15   Rx  825.15  Chan  0005  #5
Tx  870.18   Rx  825.18  Chan  0006  #6
Tx  870.21   Rx  825.21  Chan  0007  #7
Tx  870.24   Rx  825.24  Chan  0008  #8
Tx  870.27   Rx  825.27  Chan  0009  #9
Tx  870.30   Rx  825.30  Chan  0010  #10
Tx  870.33   Rx  825.33  Chan  0011  #11
Tx  870.36   Rx  825.36  Chan  0012  #12
Tx  870.39   Rx  825.39  Chan  0013  #13
Tx  870.42   Rx  825.42  Chan  0014  #14
Tx  870.45   Rx  825.45  Chan  0015  #15
Tx  870.48   Rx  825.48  Chan  0016  #16
Tx  870.51   Rx  825.51  Chan  0017  #17
Tx  870.54   Rx  825.54  Chan  0018  #18
Tx  870.57   Rx  825.57  Chan  0019  #19
Tx  870.60   Rx  825.60  Chan  0020  #20
Tx  870.63   Rx  825.63  Chan  0021  #21
Tx  870.66   Rx  825.66  Chan  0022  #22
Tx  870.69   Rx  825.69  Chan  0023  #23
Tx  870.72   Rx  825.72  Chan  0024  #24
Tx  870.75   Rx  825.75  Chan  0025  #25
Tx  870.78   Rx  825.78  Chan  0026  #26
Tx  870.81   Rx  825.81  Chan  0027  #27
Tx  870.84   Rx  825.84  Chan  0028  #28
Tx  870.87   Rx  825.87  Chan  0029  #29
Tx  870.90   Rx  825.90  Chan  0030  #30
Tx  870.93   Rx  825.93  Chan  0031  #31
Tx  870.96   Rx  825.96  Chan  0032  #32
Tx  870.99   Rx  825.99  Chan  0033  #33
Tx  871.02   Rx  826.02  Chan  0034  #34
Tx  871.05   Rx  826.05  Chan  0035  #35
Tx  871.08   Rx  826.08  Chan  0036  #36
Tx  871.11   Rx  826.11  Chan  0037  #37
Tx  871.14   Rx  826.14  Chan  0038  #38
Tx  871.17   Rx  826.17  Chan  0039  #39
Tx  871.20   Rx  826.20  Chan  0040  #40
Tx  871.23   Rx  826.23  Chan  0041  #41
Tx  871.26   Rx  826.26  Chan  0042  #42
Tx  871.29   Rx  826.29  Chan  0043  #43
Tx  871.32   Rx  826.32  Chan  0044  #44
Tx  871.35   Rx  826.35  Chan  0045  #45
Tx  871.38   Rx  826.38  Chan  0046  #46
Tx  871.41   Rx  826.41  Chan  0047  #47
Tx  871.44   Rx  826.44  Chan  0048  #48
Tx  871.47   Rx  826.47  Chan  0049  #49
Tx  871.50   Rx  826.50  Chan  0050  #50
Tx  871.53   Rx  826.53  Chan  0051  #51
Tx  871.56   Rx  826.56  Chan  0052  #52
Tx  871.59   Rx  826.59  Chan  0053  #53
Tx  871.62   Rx  826.62  Chan  0054  #54
Tx  871.65   Rx  826.65  Chan  0055  #55
Tx  871.68   Rx  826.68  Chan  0056  #56
Tx  871.71   Rx  826.71  Chan  0057  #57
Tx  871.74   Rx  826.74  Chan  0058  #58
Tx  871.77   Rx  826.77  Chan  0059  #59
Tx  871.80   Rx  826.80  Chan  0060  #60
Tx  871.83   Rx  826.83  Chan  0061  #61
Tx  871.86   Rx  826.86  Chan  0062  #62
Tx  871.89   Rx  826.89  Chan  0063  #63
Tx  871.92   Rx  826.92  Chan  0064  #64
Tx  871.95   Rx  826.95  Chan  0065  #65
Tx  871.98   Rx  826.98  Chan  0066  #66
Tx  872.01   Rx  827.01  Chan  0067  #67
Tx  872.04   Rx  827.04  Chan  0068  #68
Tx  872.07   Rx  827.07  Chan  0069  #69
Tx  872.10   Rx  827.10  Chan  0070  #70
Tx  872.13   Rx  827.13  Chan  0071  #71
Tx  872.16   Rx  827.16  Chan  0072  #72
Tx  872.19   Rx  827.19  Chan  0073  #73
Tx  872.22   Rx  827.22  Chan  0074  #74
Tx  872.25   Rx  827.25  Chan  0075  #75
Tx  872.28   Rx  827.28  Chan  0076  #76
Tx  872.31   Rx  827.31  Chan  0077  #77
Tx  872.34   Rx  827.34  Chan  0078  #78
Tx  872.37   Rx  827.37  Chan  0079  #79
Tx  872.40   Rx  827.40  Chan  0080  #80
Tx  872.43   Rx  827.43  Chan  0081  #81
Tx  872.46   Rx  827.46  Chan  0082  #82
Tx  872.49   Rx  827.49  Chan  0083  #83
Tx  872.52   Rx  827.52  Chan  0084  #84
Tx  872.55   Rx  827.55  Chan  0085  #85
Tx  872.58   Rx  827.58  Chan  0086  #86
Tx  872.61   Rx  827.61  Chan  0087  #87
Tx  872.64   Rx  827.64  Chan  0088  #88
Tx  872.67   Rx  827.67  Chan  0089  #89
Tx  872.70   Rx  827.70  Chan  0090  #90
Tx  872.73   Rx  827.73  Chan  0091  #91
Tx  872.76   Rx  827.76  Chan  0092  #92
Tx  872.79   Rx  827.79  Chan  0093  #93
Tx  872.82   Rx  827.82  Chan  0094  #94
Tx  872.85   Rx  827.85  Chan  0095  #95
Tx  872.88   Rx  827.88  Chan  0096  #96
Tx  872.91   Rx  827.91  Chan  0097  #97
Tx  872.94   Rx  827.94  Chan  0098  #98
Tx  872.97   Rx  827.97  Chan  0099  #99
Tx  873.00   Rx  828.00  Chan  0100  #100
Tx  873.03   Rx  828.03  Chan  0101  #101
Tx  873.06   Rx  828.06  Chan  0102  #102
Tx  873.09   Rx  828.09  Chan  0103  #103
Tx  873.12   Rx  828.12  Chan  0104  #104
Tx  873.15   Rx  828.15  Chan  0105  #105
Tx  873.18   Rx  828.18  Chan  0106  #106
Tx  873.21   Rx  828.21  Chan  0107  #107
Tx  873.24   Rx  828.24  Chan  0108  #108
Tx  873.27   Rx  828.27  Chan  0109  #109
Tx  873.30   Rx  828.30  Chan  0110  #110
Tx  873.33   Rx  828.33  Chan  0111  #111
Tx  873.36   Rx  828.36  Chan  0112  #112
Tx  873.39   Rx  828.39  Chan  0113  #113
Tx  873.42   Rx  828.42  Chan  0114  #114
Tx  873.45   Rx  828.45  Chan  0115  #115
Tx  873.48   Rx  828.48  Chan  0116  #116
Tx  873.51   Rx  828.51  Chan  0117  #117
Tx  873.54   Rx  828.54  Chan  0118  #118
Tx  873.57   Rx  828.57  Chan  0119  #119
Tx  873.60   Rx  828.60  Chan  0120  #120
Tx  873.63   Rx  828.63  Chan  0121  #121
Tx  873.66   Rx  828.66  Chan  0122  #122
Tx  873.69   Rx  828.69  Chan  0123  #123
Tx  873.72   Rx  828.72  Chan  0124  #124
Tx  873.75   Rx  828.75  Chan  0125  #125
Tx  873.78   Rx  828.78  Chan  0126  #126
Tx  873.81   Rx  828.81  Chan  0127  #127
Tx  873.84   Rx  828.84  Chan  0128  #128
Tx  873.87   Rx  828.87  Chan  0129  #129
Tx  873.90   Rx  828.90  Chan  0130  #130
Tx  873.93   Rx  828.93  Chan  0131  #131
Tx  873.96   Rx  828.96  Chan  0132  #132
Tx  873.99   Rx  828.99  Chan  0133  #133
Tx  874.02   Rx  829.02  Chan  0134  #134
Tx  874.05   Rx  829.05  Chan  0135  #135
Tx  874.08   Rx  829.08  Chan  0136  #136
Tx  874.11   Rx  829.11  Chan  0137  #137
Tx  874.14   Rx  829.14  Chan  0138  #138
Tx  874.17   Rx  829.17  Chan  0139  #139
Tx  874.20   Rx  829.20  Chan  0140  #140
Tx  874.23   Rx  829.23  Chan  0141  #141
Tx  874.26   Rx  829.26  Chan  0142  #142
Tx  874.29   Rx  829.29  Chan  0143  #143
Tx  874.32   Rx  829.32  Chan  0144  #144
Tx  874.35   Rx  829.35  Chan  0145  #145
Tx  874.38   Rx  829.38  Chan  0146  #146
Tx  874.41   Rx  829.41  Chan  0147  #147
Tx  874.44   Rx  829.44  Chan  0148  #148
Tx  874.47   Rx  829.47  Chan  0149  #149
Tx  874.50   Rx  829.50  Chan  0150  #150
Tx  874.53   Rx  829.53  Chan  0151  #151
Tx  874.56   Rx  829.56  Chan  0152  #152
Tx  874.59   Rx  829.59  Chan  0153  #153
Tx  874.62   Rx  829.62  Chan  0154  #154
Tx  874.65   Rx  829.65  Chan  0155  #155
Tx  874.68   Rx  829.68  Chan  0156  #156
Tx  874.71   Rx  829.71  Chan  0157  #157
Tx  874.74   Rx  829.74  Chan  0158  #158
Tx  874.77   Rx  829.77  Chan  0159  #159
Tx  874.80   Rx  829.80  Chan  0160  #160
Tx  874.83   Rx  829.83  Chan  0161  #161
Tx  874.86   Rx  829.86  Chan  0162  #162
Tx  874.89   Rx  829.89  Chan  0163  #163
Tx  874.92   Rx  829.92  Chan  0164  #164
Tx  874.95   Rx  829.95  Chan  0165  #165
Tx  874.98   Rx  829.98  Chan  0166  #166
Tx  875.01   Rx  830.01  Chan  0167  #167
Tx  875.04   Rx  830.04  Chan  0168  #168
Tx  875.07   Rx  830.07  Chan  0169  #169
Tx  875.10   Rx  830.10  Chan  0170  #170
Tx  875.13   Rx  830.13  Chan  0171  #171
Tx  875.16   Rx  830.16  Chan  0172  #172
Tx  875.19   Rx  830.19  Chan  0173  #173
Tx  875.22   Rx  830.22  Chan  0174  #174
Tx  875.25   Rx  830.25  Chan  0175  #175
Tx  875.28   Rx  830.28  Chan  0176  #176
Tx  875.31   Rx  830.31  Chan  0177  #177
Tx  875.34   Rx  830.34  Chan  0178  #178
Tx  875.37   Rx  830.37  Chan  0179  #179
Tx  875.40   Rx  830.40  Chan  0180  #180
Tx  875.43   Rx  830.43  Chan  0181  #181
Tx  875.46   Rx  830.46  Chan  0182  #182
Tx  875.49   Rx  830.49  Chan  0183  #183
Tx  875.52   Rx  830.52  Chan  0184  #184
Tx  875.55   Rx  830.55  Chan  0185  #185
Tx  875.58   Rx  830.58  Chan  0186  #186
Tx  875.61   Rx  830.61  Chan  0187  #187
Tx  875.64   Rx  830.64  Chan  0188  #188
Tx  875.67   Rx  830.67  Chan  0189  #189
Tx  875.70   Rx  830.70  Chan  0190  #190
Tx  875.73   Rx  830.73  Chan  0191  #191
Tx  875.76   Rx  830.76  Chan  0192  #192
Tx  875.79   Rx  830.79  Chan  0193  #193
Tx  875.82   Rx  830.82  Chan  0194  #194
Tx  875.85   Rx  830.85  Chan  0195  #195
Tx  875.88   Rx  830.88  Chan  0196  #196
Tx  875.91   Rx  830.91  Chan  0197  #197
Tx  875.94   Rx  830.94  Chan  0198  #198
Tx  875.97   Rx  830.97  Chan  0199  #199
Tx  876.00   Rx  831.00  Chan  0200  #200
Tx  876.03   Rx  831.03  Chan  0201  #201
Tx  876.06   Rx  831.06  Chan  0202  #202
Tx  876.09   Rx  831.09  Chan  0203  #203
Tx  876.12   Rx  831.12  Chan  0204  #204
Tx  876.15   Rx  831.15  Chan  0205  #205
Tx  876.18   Rx  831.18  Chan  0206  #206
Tx  876.21   Rx  831.21  Chan  0207  #207
Tx  876.24   Rx  831.24  Chan  0208  #208
Tx  876.27   Rx  831.27  Chan  0209  #209
Tx  876.30   Rx  831.30  Chan  0210  #210
Tx  876.33   Rx  831.33  Chan  0211  #211
Tx  876.36   Rx  831.36  Chan  0212  #212
Tx  876.39   Rx  831.39  Chan  0213  #213
Tx  876.42   Rx  831.42  Chan  0214  #214
Tx  876.45   Rx  831.45  Chan  0215  #215
Tx  876.48   Rx  831.48  Chan  0216  #216
Tx  876.51   Rx  831.51  Chan  0217  #217
Tx  876.54   Rx  831.54  Chan  0218  #218
Tx  876.57   Rx  831.57  Chan  0219  #219
Tx  876.60   Rx  831.60  Chan  0220  #220
Tx  876.63   Rx  831.63  Chan  0221  #221
Tx  876.66   Rx  831.66  Chan  0222  #222
Tx  876.69   Rx  831.69  Chan  0223  #223
Tx  876.72   Rx  831.72  Chan  0224  #224
Tx  876.75   Rx  831.75  Chan  0225  #225
Tx  876.78   Rx  831.78  Chan  0226  #226
Tx  876.81   Rx  831.81  Chan  0227  #227
Tx  876.84   Rx  831.84  Chan  0228  #228
Tx  876.87   Rx  831.87  Chan  0229  #229
Tx  876.90   Rx  831.90  Chan  0230  #230
Tx  876.93   Rx  831.93  Chan  0231  #231
Tx  876.96   Rx  831.96  Chan  0232  #232
Tx  876.99   Rx  831.99  Chan  0233  #233
Tx  877.02   Rx  832.02  Chan  0234  #234
Tx  877.05   Rx  832.05  Chan  0235  #235
Tx  877.08   Rx  832.08  Chan  0236  #236
Tx  877.11   Rx  832.11  Chan  0237  #237
Tx  877.14   Rx  832.14  Chan  0238  #238
Tx  877.17   Rx  832.17  Chan  0239  #239
Tx  877.20   Rx  832.20  Chan  0240  #240
Tx  877.23   Rx  832.23  Chan  0241  #241
Tx  877.26   Rx  832.26  Chan  0242  #242
Tx  877.29   Rx  832.29  Chan  0243  #243
Tx  877.32   Rx  832.32  Chan  0244  #244
Tx  877.35   Rx  832.35  Chan  0245  #245
Tx  877.38   Rx  832.38  Chan  0246  #246
Tx  877.41   Rx  832.41  Chan  0247  #247
Tx  877.44   Rx  832.44  Chan  0248  #248
Tx  877.47   Rx  832.47  Chan  0249  #249
Tx  877.50   Rx  832.50  Chan  0250  #250
Tx  877.53   Rx  832.53  Chan  0251  #251
Tx  877.56   Rx  832.56  Chan  0252  #252
Tx  877.59   Rx  832.59  Chan  0253  #253
Tx  877.62   Rx  832.62  Chan  0254  #254
Tx  877.65   Rx  832.65  Chan  0255  #255
Tx  877.68   Rx  832.68  Chan  0256  #256
Tx  877.71   Rx  832.71  Chan  0257  #257
Tx  877.74   Rx  832.74  Chan  0258  #258
Tx  877.77   Rx  832.77  Chan  0259  #259
Tx  877.80   Rx  832.80  Chan  0260  #260
Tx  877.83   Rx  832.83  Chan  0261  #261
Tx  877.86   Rx  832.86  Chan  0262  #262
Tx  877.89   Rx  832.89  Chan  0263  #263
Tx  877.92   Rx  832.92  Chan  0264  #264
Tx  877.95   Rx  832.95  Chan  0265  #265
Tx  877.98   Rx  832.98  Chan  0266  #266
Tx  878.01   Rx  833.01  Chan  0267  #267
Tx  878.04   Rx  833.04  Chan  0268  #268
Tx  878.07   Rx  833.07  Chan  0269  #269
Tx  878.10   Rx  833.10  Chan  0270  #270
Tx  878.13   Rx  833.13  Chan  0271  #271
Tx  878.16   Rx  833.16  Chan  0272  #272
Tx  878.19   Rx  833.19  Chan  0273  #273
Tx  878.22   Rx  833.22  Chan  0274  #274
Tx  878.25   Rx  833.25  Chan  0275  #275
Tx  878.28   Rx  833.28  Chan  0276  #276
Tx  878.31   Rx  833.31  Chan  0277  #277
Tx  878.34   Rx  833.34  Chan  0278  #278
Tx  878.37   Rx  833.37  Chan  0279  #279
Tx  878.40   Rx  833.40  Chan  0280  #280
Tx  878.43   Rx  833.43  Chan  0281  #281
Tx  878.46   Rx  833.46  Chan  0282  #282
Tx  878.49   Rx  833.49  Chan  0283  #283
Tx  878.52   Rx  833.52  Chan  0284  #284
Tx  878.55   Rx  833.55  Chan  0285  #285
Tx  878.58   Rx  833.58  Chan  0286  #286
Tx  878.61   Rx  833.61  Chan  0287  #287
Tx  878.64   Rx  833.64  Chan  0288  #288
Tx  878.67   Rx  833.67  Chan  0289  #289
Tx  878.70   Rx  833.70  Chan  0290  #290
Tx  878.73   Rx  833.73  Chan  0291  #291
Tx  878.76   Rx  833.76  Chan  0292  #292
Tx  878.79   Rx  833.79  Chan  0293  #293
Tx  878.82   Rx  833.82  Chan  0294  #294
Tx  878.85   Rx  833.85  Chan  0295  #295
Tx  878.88   Rx  833.88  Chan  0296  #296
Tx  878.91   Rx  833.91  Chan  0297  #297
Tx  878.94   Rx  833.94  Chan  0298  #298
Tx  878.97   Rx  833.97  Chan  0299  #299
Tx  879.00   Rx  834.00  Chan  0300  #300
Tx  879.03   Rx  834.03  Chan  0301  #301
Tx  879.06   Rx  834.06  Chan  0302  #302
Tx  879.09   Rx  834.09  Chan  0303  #303
Tx  879.12   Rx  834.12  Chan  0304  #304
Tx  879.15   Rx  834.15  Chan  0305  #305
Tx  879.18   Rx  834.18  Chan  0306  #306
Tx  879.21   Rx  834.21  Chan  0307  #307
Tx  879.24   Rx  834.24  Chan  0308  #308
Tx  879.27   Rx  834.27  Chan  0309  #309
Tx  879.30   Rx  834.30  Chan  0310  #310
Tx  879.33   Rx  834.33  Chan  0311  #311
Tx  879.36   Rx  834.36  Chan  0312  #312
Tx  879.39   Rx  834.39  Chan  0313  #313
Tx  879.42   Rx  834.42  Chan  0314  #314
Tx  879.45   Rx  834.45  Chan  0315  #315
Tx  879.48   Rx  834.48  Chan  0316  #316
Tx  879.51   Rx  834.51  Chan  0317  #317
Tx  879.54   Rx  834.54  Chan  0318  #318
Tx  879.57   Rx  834.57  Chan  0319  #319
Tx  879.60   Rx  834.60  Chan  0320  #320
Tx  879.63   Rx  834.63  Chan  0321  #321
Tx  879.66   Rx  834.66  Chan  0322  #322
Tx  879.69   Rx  834.69  Chan  0323  #323
Tx  879.72   Rx  834.72  Chan  0324  #324
Tx  879.75   Rx  834.75  Chan  0325  #325
Tx  879.78   Rx  834.78  Chan  0326  #326
Tx  879.81   Rx  834.81  Chan  0327  #327
Tx  879.84   Rx  834.84  Chan  0328  #328
Tx  879.87   Rx  834.87  Chan  0329  #329
Tx  879.90   Rx  834.90  Chan  0330  #330
Tx  879.93   Rx  834.93  Chan  0331  #331
Tx  879.96   Rx  834.96  Chan  0332  #332
Tx  879.99   Rx  834.99  Chan  0333  #333
Tx  880.02   Rx  835.02  Chan  0334  #334
Tx  880.05   Rx  835.05  Chan  0335  #335
Tx  880.08   Rx  835.08  Chan  0336  #336
Tx  880.11   Rx  835.11  Chan  0337  #337
Tx  880.14   Rx  835.14  Chan  0338  #338
Tx  880.17   Rx  835.17  Chan  0339  #339
Tx  880.20   Rx  835.20  Chan  0340  #340
Tx  880.23   Rx  835.23  Chan  0341  #341
Tx  880.26   Rx  835.26  Chan  0342  #342
Tx  880.29   Rx  835.29  Chan  0343  #343
Tx  880.32   Rx  835.32  Chan  0344  #344
Tx  880.35   Rx  835.35  Chan  0345  #345
Tx  880.38   Rx  835.38  Chan  0346  #346
Tx  880.41   Rx  835.41  Chan  0347  #347
Tx  880.44   Rx  835.44  Chan  0348  #348
Tx  880.47   Rx  835.47  Chan  0349  #349
Tx  880.50   Rx  835.50  Chan  0350  #350
Tx  880.53   Rx  835.53  Chan  0351  #351
Tx  880.56   Rx  835.56  Chan  0352  #352
Tx  880.59   Rx  835.59  Chan  0353  #353
Tx  880.62   Rx  835.62  Chan  0354  #354
Tx  880.65   Rx  835.65  Chan  0355  #355
Tx  880.68   Rx  835.68  Chan  0356  #356
Tx  880.71   Rx  835.71  Chan  0357  #357
Tx  880.74   Rx  835.74  Chan  0358  #358
Tx  880.77   Rx  835.77  Chan  0359  #359
Tx  880.80   Rx  835.80  Chan  0360  #360
Tx  880.83   Rx  835.83  Chan  0361  #361
Tx  880.86   Rx  835.86  Chan  0362  #362
Tx  880.89   Rx  835.89  Chan  0363  #363
Tx  880.92   Rx  835.92  Chan  0364  #364
Tx  880.95   Rx  835.95  Chan  0365  #365
Tx  880.98   Rx  835.98  Chan  0366  #366
Tx  881.01   Rx  836.01  Chan  0367  #367
Tx  881.04   Rx  836.04  Chan  0368  #368
Tx  881.07   Rx  836.07  Chan  0369  #369
Tx  881.10   Rx  836.10  Chan  0370  #370
Tx  881.13   Rx  836.13  Chan  0371  #371
Tx  881.16   Rx  836.16  Chan  0372  #372
Tx  881.19   Rx  836.19  Chan  0373  #373
Tx  881.22   Rx  836.22  Chan  0374  #374
Tx  881.25   Rx  836.25  Chan  0375  #375
Tx  881.28   Rx  836.28  Chan  0376  #376
Tx  881.31   Rx  836.31  Chan  0377  #377
Tx  881.34   Rx  836.34  Chan  0378  #378
Tx  881.37   Rx  836.37  Chan  0379  #379
Tx  881.40   Rx  836.40  Chan  0380  #380
Tx  881.43   Rx  836.43  Chan  0381  #381
Tx  881.46   Rx  836.46  Chan  0382  #382
Tx  881.49   Rx  836.49  Chan  0383  #383
Tx  881.52   Rx  836.52  Chan  0384  #384
Tx  881.55   Rx  836.55  Chan  0385  #385
Tx  881.58   Rx  836.58  Chan  0386  #386
Tx  881.61   Rx  836.61  Chan  0387  #387
Tx  881.64   Rx  836.64  Chan  0388  #388
Tx  881.67   Rx  836.67  Chan  0389  #389
Tx  881.70   Rx  836.70  Chan  0390  #390
Tx  881.73   Rx  836.73  Chan  0391  #391
Tx  881.76   Rx  836.76  Chan  0392  #392
Tx  881.79   Rx  836.79  Chan  0393  #393
Tx  881.82   Rx  836.82  Chan  0394  #394
Tx  881.85   Rx  836.85  Chan  0395  #395
Tx  881.88   Rx  836.88  Chan  0396  #396
Tx  881.91   Rx  836.91  Chan  0397  #397
Tx  881.94   Rx  836.94  Chan  0398  #398
Tx  881.97   Rx  836.97  Chan  0399  #399
Tx  882.00   Rx  837.00  Chan  0400  #400
Tx  882.03   Rx  837.03  Chan  0401  #401
Tx  882.06   Rx  837.06  Chan  0402  #402
Tx  882.09   Rx  837.09  Chan  0403  #403
Tx  882.12   Rx  837.12  Chan  0404  #404
Tx  882.15   Rx  837.15  Chan  0405  #405
Tx  882.18   Rx  837.18  Chan  0406  #406
Tx  882.21   Rx  837.21  Chan  0407  #407
Tx  882.24   Rx  837.24  Chan  0408  #408
Tx  882.27   Rx  837.27  Chan  0409  #409
Tx  882.30   Rx  837.30  Chan  0410  #410
Tx  882.33   Rx  837.33  Chan  0411  #411
Tx  882.36   Rx  837.36  Chan  0412  #412
Tx  882.39   Rx  837.39  Chan  0413  #413
Tx  882.42   Rx  837.42  Chan  0414  #414
Tx  882.45   Rx  837.45  Chan  0415  #415
Tx  882.48   Rx  837.48  Chan  0416  #416
Tx  882.51   Rx  837.51  Chan  0417  #417
Tx  882.54   Rx  837.54  Chan  0418  #418
Tx  882.57   Rx  837.57  Chan  0419  #419
Tx  882.60   Rx  837.60  Chan  0420  #420
Tx  882.63   Rx  837.63  Chan  0421  #421
Tx  882.66   Rx  837.66  Chan  0422  #422
Tx  882.69   Rx  837.69  Chan  0423  #423
Tx  882.72   Rx  837.72  Chan  0424  #424
Tx  882.75   Rx  837.75  Chan  0425  #425
Tx  882.78   Rx  837.78  Chan  0426  #426
Tx  882.81   Rx  837.81  Chan  0427  #427
Tx  882.84   Rx  837.84  Chan  0428  #428
Tx  882.87   Rx  837.87  Chan  0429  #429
Tx  882.90   Rx  837.90  Chan  0430  #430
Tx  882.93   Rx  837.93  Chan  0431  #431
Tx  882.96   Rx  837.96  Chan  0432  #432
Tx  882.99   Rx  837.99  Chan  0433  #433
Tx  883.02   Rx  838.02  Chan  0434  #434
Tx  883.05   Rx  838.05  Chan  0435  #435
Tx  883.08   Rx  838.08  Chan  0436  #436
Tx  883.11   Rx  838.11  Chan  0437  #437
Tx  883.14   Rx  838.14  Chan  0438  #438
Tx  883.17   Rx  838.17  Chan  0439  #439
Tx  883.20   Rx  838.20  Chan  0440  #440
Tx  883.23   Rx  838.23  Chan  0441  #441
Tx  883.26   Rx  838.26  Chan  0442  #442
Tx  883.29   Rx  838.29  Chan  0443  #443
Tx  883.32   Rx  838.32  Chan  0444  #444
Tx  883.35   Rx  838.35  Chan  0445  #445
Tx  883.38   Rx  838.38  Chan  0446  #446
Tx  883.41   Rx  838.41  Chan  0447  #447
Tx  883.44   Rx  838.44  Chan  0448  #448
Tx  883.47   Rx  838.47  Chan  0449  #449
Tx  883.50   Rx  838.50  Chan  0450  #450
Tx  883.53   Rx  838.53  Chan  0451  #451
Tx  883.56   Rx  838.56  Chan  0452  #452
Tx  883.59   Rx  838.59  Chan  0453  #453
Tx  883.62   Rx  838.62  Chan  0454  #454
Tx  883.65   Rx  838.65  Chan  0455  #455
Tx  883.68   Rx  838.68  Chan  0456  #456
Tx  883.71   Rx  838.71  Chan  0457  #457
Tx  883.74   Rx  838.74  Chan  0458  #458
Tx  883.77   Rx  838.77  Chan  0459  #459
Tx  883.80   Rx  838.80  Chan  0460  #460
Tx  883.83   Rx  838.83  Chan  0461  #461
Tx  883.86   Rx  838.86  Chan  0462  #462
Tx  883.89   Rx  838.89  Chan  0463  #463
Tx  883.92   Rx  838.92  Chan  0464  #464
Tx  883.95   Rx  838.95  Chan  0465  #465
Tx  883.98   Rx  838.98  Chan  0466  #466
Tx  884.01   Rx  839.01  Chan  0467  #467
Tx  884.04   Rx  839.04  Chan  0468  #468
Tx  884.07   Rx  839.07  Chan  0469  #469
Tx  884.10   Rx  839.10  Chan  0470  #470
Tx  884.13   Rx  839.13  Chan  0471  #471
Tx  884.16   Rx  839.16  Chan  0472  #472
Tx  884.19   Rx  839.19  Chan  0473  #473
Tx  884.22   Rx  839.22  Chan  0474  #474
Tx  884.25   Rx  839.25  Chan  0475  #475
Tx  884.28   Rx  839.28  Chan  0476  #476
Tx  884.31   Rx  839.31  Chan  0477  #477
Tx  884.34   Rx  839.34  Chan  0478  #478
Tx  884.37   Rx  839.37  Chan  0479  #479
Tx  884.40   Rx  839.40  Chan  0480  #480
Tx  884.43   Rx  839.43  Chan  0481  #481
Tx  884.46   Rx  839.46  Chan  0482  #482
Tx  884.49   Rx  839.49  Chan  0483  #483
Tx  884.52   Rx  839.52  Chan  0484  #484
Tx  884.55   Rx  839.55  Chan  0485  #485
Tx  884.58   Rx  839.58  Chan  0486  #486
Tx  884.61   Rx  839.61  Chan  0487  #487
Tx  884.64   Rx  839.64  Chan  0488  #488
Tx  884.67   Rx  839.67  Chan  0489  #489
Tx  884.70   Rx  839.70  Chan  0490  #490
Tx  884.73   Rx  839.73  Chan  0491  #491
Tx  884.76   Rx  839.76  Chan  0492  #492
Tx  884.79   Rx  839.79  Chan  0493  #493
Tx  884.82   Rx  839.82  Chan  0494  #494
Tx  884.85   Rx  839.85  Chan  0495  #495
Tx  884.88   Rx  839.88  Chan  0496  #496
Tx  884.91   Rx  839.91  Chan  0497  #497
Tx  884.94   Rx  839.94  Chan  0498  #498
Tx  884.97   Rx  839.97  Chan  0499  #499
Tx  885.00   Rx  840.00  Chan  0500  #500
Tx  885.03   Rx  840.03  Chan  0501  #501
Tx  885.06   Rx  840.06  Chan  0502  #502
Tx  885.09   Rx  840.09  Chan  0503  #503
Tx  885.12   Rx  840.12  Chan  0504  #504
Tx  885.15   Rx  840.15  Chan  0505  #505
Tx  885.18   Rx  840.18  Chan  0506  #506
Tx  885.21   Rx  840.21  Chan  0507  #507
Tx  885.24   Rx  840.24  Chan  0508  #508
Tx  885.27   Rx  840.27  Chan  0509  #509
Tx  885.30   Rx  840.30  Chan  0510  #510
Tx  885.33   Rx  840.33  Chan  0511  #511
Tx  885.36   Rx  840.36  Chan  0512  #512
Tx  885.39   Rx  840.39  Chan  0513  #513
Tx  885.42   Rx  840.42  Chan  0514  #514
Tx  885.45   Rx  840.45  Chan  0515  #515
Tx  885.48   Rx  840.48  Chan  0516  #516
Tx  885.51   Rx  840.51  Chan  0517  #517
Tx  885.54   Rx  840.54  Chan  0518  #518
Tx  885.57   Rx  840.57  Chan  0519  #519
Tx  885.60   Rx  840.60  Chan  0520  #520
Tx  885.63   Rx  840.63  Chan  0521  #521
Tx  885.66   Rx  840.66  Chan  0522  #522
Tx  885.69   Rx  840.69  Chan  0523  #523
Tx  885.72   Rx  840.72  Chan  0524  #524
Tx  885.75   Rx  840.75  Chan  0525  #525
Tx  885.78   Rx  840.78  Chan  0526  #526
Tx  885.81   Rx  840.81  Chan  0527  #527
Tx  885.84   Rx  840.84  Chan  0528  #528
Tx  885.87   Rx  840.87  Chan  0529  #529
Tx  885.90   Rx  840.90  Chan  0530  #530
Tx  885.93   Rx  840.93  Chan  0531  #531
Tx  885.96   Rx  840.96  Chan  0532  #532
Tx  885.99   Rx  840.99  Chan  0533  #533
Tx  886.02   Rx  841.02  Chan  0534  #534
Tx  886.05   Rx  841.05  Chan  0535  #535
Tx  886.08   Rx  841.08  Chan  0536  #536
Tx  886.11   Rx  841.11  Chan  0537  #537
Tx  886.14   Rx  841.14  Chan  0538  #538
Tx  886.17   Rx  841.17  Chan  0539  #539
Tx  886.20   Rx  841.20  Chan  0540  #540
Tx  886.23   Rx  841.23  Chan  0541  #541
Tx  886.26   Rx  841.26  Chan  0542  #542
Tx  886.29   Rx  841.29  Chan  0543  #543
Tx  886.32   Rx  841.32  Chan  0544  #544
Tx  886.35   Rx  841.35  Chan  0545  #545
Tx  886.38   Rx  841.38  Chan  0546  #546
Tx  886.41   Rx  841.41  Chan  0547  #547
Tx  886.44   Rx  841.44  Chan  0548  #548
Tx  886.47   Rx  841.47  Chan  0549  #549
Tx  886.50   Rx  841.50  Chan  0550  #550
Tx  886.53   Rx  841.53  Chan  0551  #551
Tx  886.56   Rx  841.56  Chan  0552  #552
Tx  886.59   Rx  841.59  Chan  0553  #553
Tx  886.62   Rx  841.62  Chan  0554  #554
Tx  886.65   Rx  841.65  Chan  0555  #555
Tx  886.68   Rx  841.68  Chan  0556  #556
Tx  886.71   Rx  841.71  Chan  0557  #557
Tx  886.74   Rx  841.74  Chan  0558  #558
Tx  886.77   Rx  841.77  Chan  0559  #559
Tx  886.80   Rx  841.80  Chan  0560  #560
Tx  886.83   Rx  841.83  Chan  0561  #561
Tx  886.86   Rx  841.86  Chan  0562  #562
Tx  886.89   Rx  841.89  Chan  0563  #563
Tx  886.92   Rx  841.92  Chan  0564  #564
Tx  886.95   Rx  841.95  Chan  0565  #565
Tx  886.98   Rx  841.98  Chan  0566  #566
Tx  887.01   Rx  842.01  Chan  0567  #567
Tx  887.04   Rx  842.04  Chan  0568  #568
Tx  887.07   Rx  842.07  Chan  0569  #569
Tx  887.10   Rx  842.10  Chan  0570  #570
Tx  887.13   Rx  842.13  Chan  0571  #571
Tx  887.16   Rx  842.16  Chan  0572  #572
Tx  887.19   Rx  842.19  Chan  0573  #573
Tx  887.22   Rx  842.22  Chan  0574  #574
Tx  887.25   Rx  842.25  Chan  0575  #575
Tx  887.28   Rx  842.28  Chan  0576  #576
Tx  887.31   Rx  842.31  Chan  0577  #577
Tx  887.34   Rx  842.34  Chan  0578  #578
Tx  887.37   Rx  842.37  Chan  0579  #579
Tx  887.40   Rx  842.40  Chan  0580  #580
Tx  887.43   Rx  842.43  Chan  0581  #581
Tx  887.46   Rx  842.46  Chan  0582  #582
Tx  887.49   Rx  842.49  Chan  0583  #583
Tx  887.52   Rx  842.52  Chan  0584  #584
Tx  887.55   Rx  842.55  Chan  0585  #585
Tx  887.58   Rx  842.58  Chan  0586  #586
Tx  887.61   Rx  842.61  Chan  0587  #587
Tx  887.64   Rx  842.64  Chan  0588  #588
Tx  887.67   Rx  842.67  Chan  0589  #589
Tx  887.70   Rx  842.70  Chan  0590  #590
Tx  887.73   Rx  842.73  Chan  0591  #591
Tx  887.76   Rx  842.76  Chan  0592  #592
Tx  887.79   Rx  842.79  Chan  0593  #593
Tx  887.82   Rx  842.82  Chan  0594  #594
Tx  887.85   Rx  842.85  Chan  0595  #595
Tx  887.88   Rx  842.88  Chan  0596  #596
Tx  887.91   Rx  842.91  Chan  0597  #597
Tx  887.94   Rx  842.94  Chan  0598  #598
Tx  887.97   Rx  842.97  Chan  0599  #599
Tx  888.00   Rx  843.00  Chan  0600  #600
Tx  888.03   Rx  843.03  Chan  0601  #601
Tx  888.06   Rx  843.06  Chan  0602  #602
Tx  888.09   Rx  843.09  Chan  0603  #603
Tx  888.12   Rx  843.12  Chan  0604  #604
Tx  888.15   Rx  843.15  Chan  0605  #605
Tx  888.18   Rx  843.18  Chan  0606  #606
Tx  888.21   Rx  843.21  Chan  0607  #607
Tx  888.24   Rx  843.24  Chan  0608  #608
Tx  888.27   Rx  843.27  Chan  0609  #609
Tx  888.30   Rx  843.30  Chan  0610  #610
Tx  888.33   Rx  843.33  Chan  0611  #611
Tx  888.36   Rx  843.36  Chan  0612  #612
Tx  888.39   Rx  843.39  Chan  0613  #613
Tx  888.42   Rx  843.42  Chan  0614  #614
Tx  888.45   Rx  843.45  Chan  0615  #615
Tx  888.48   Rx  843.48  Chan  0616  #616
Tx  888.51   Rx  843.51  Chan  0617  #617
Tx  888.54   Rx  843.54  Chan  0618  #618
Tx  888.57   Rx  843.57  Chan  0619  #619
Tx  888.60   Rx  843.60  Chan  0620  #620
Tx  888.63   Rx  843.63  Chan  0621  #621
Tx  888.66   Rx  843.66  Chan  0622  #622
Tx  888.69   Rx  843.69  Chan  0623  #623
Tx  888.72   Rx  843.72  Chan  0624  #624
Tx  888.75   Rx  843.75  Chan  0625  #625
Tx  888.78   Rx  843.78  Chan  0626  #626
Tx  888.81   Rx  843.81  Chan  0627  #627
Tx  888.84   Rx  843.84  Chan  0628  #628
Tx  888.87   Rx  843.87  Chan  0629  #629
Tx  888.90   Rx  843.90  Chan  0630  #630
Tx  888.93   Rx  843.93  Chan  0631  #631
Tx  888.96   Rx  843.96  Chan  0632  #632
Tx  888.99   Rx  843.99  Chan  0633  #633
Tx  889.02   Rx  844.02  Chan  0634  #634
Tx  889.05   Rx  844.05  Chan  0635  #635
Tx  889.08   Rx  844.08  Chan  0636  #636
Tx  889.11   Rx  844.11  Chan  0637  #637
Tx  889.14   Rx  844.14  Chan  0638  #638
Tx  889.17   Rx  844.17  Chan  0639  #639
Tx  889.20   Rx  844.20  Chan  0640  #640
Tx  889.23   Rx  844.23  Chan  0641  #641
Tx  889.26   Rx  844.26  Chan  0642  #642
Tx  889.29   Rx  844.29  Chan  0643  #643
Tx  889.32   Rx  844.32  Chan  0644  #644
Tx  889.35   Rx  844.35  Chan  0645  #645
Tx  889.38   Rx  844.38  Chan  0646  #646
Tx  889.41   Rx  844.41  Chan  0647  #647
Tx  889.44   Rx  844.44  Chan  0648  #648
Tx  889.47   Rx  844.47  Chan  0649  #649
Tx  889.50   Rx  844.50  Chan  0650  #650
Tx  889.53   Rx  844.53  Chan  0651  #651
Tx  889.56   Rx  844.56  Chan  0652  #652
Tx  889.59   Rx  844.59  Chan  0653  #653
Tx  889.62   Rx  844.62  Chan  0654  #654
Tx  889.65   Rx  844.65  Chan  0655  #655
Tx  889.68   Rx  844.68  Chan  0656  #656
Tx  889.71   Rx  844.71  Chan  0657  #657
Tx  889.74   Rx  844.74  Chan  0658  #658
Tx  889.77   Rx  844.77  Chan  0659  #659
Tx  889.80   Rx  844.80  Chan  0660  #660
Tx  889.83   Rx  844.83  Chan  0661  #661
Tx  889.86   Rx  844.86  Chan  0662  #662
Tx  889.89   Rx  844.89  Chan  0663  #663
Tx  889.92   Rx  844.92  Chan  0664  #664
Tx  889.95   Rx  844.95  Chan  0665  #665
Tx  889.98   Rx  844.98  Chan  0666  #666

Upper Set Part 1 (667-799)

Tower Freq.  Mobile Freq.    11xxxx# Channel

Tx  890.01   Rx  845.01  Chan  0667  #667
Tx  890.04   Rx  845.04  Chan  0668  #668
Tx  890.07   Rx  845.07  Chan  0669  #669
Tx  890.10   Rx  845.10  Chan  0670  #670
Tx  890.13   Rx  845.13  Chan  0671  #671
Tx  890.16   Rx  845.16  Chan  0672  #672
Tx  890.19   Rx  845.19  Chan  0673  #673
Tx  890.22   Rx  845.22  Chan  0674  #674
Tx  890.25   Rx  845.25  Chan  0675  #675
Tx  890.28   Rx  845.28  Chan  0676  #676
Tx  890.31   Rx  845.31  Chan  0677  #677
Tx  890.34   Rx  845.34  Chan  0678  #678
Tx  890.37   Rx  845.37  Chan  0679  #679
Tx  890.40   Rx  845.40  Chan  0680  #680
Tx  890.43   Rx  845.43  Chan  0681  #681
Tx  890.46   Rx  845.46  Chan  0682  #682
Tx  890.49   Rx  845.49  Chan  0683  #683
Tx  890.52   Rx  845.52  Chan  0684  #684
Tx  890.55   Rx  845.55  Chan  0685  #685
Tx  890.58   Rx  845.58  Chan  0686  #686
Tx  890.61   Rx  845.61  Chan  0687  #687
Tx  890.64   Rx  845.64  Chan  0688  #688
Tx  890.67   Rx  845.67  Chan  0689  #689
Tx  890.70   Rx  845.70  Chan  0690  #690
Tx  890.73   Rx  845.73  Chan  0691  #691
Tx  890.76   Rx  845.76  Chan  0692  #692
Tx  890.79   Rx  845.79  Chan  0693  #693
Tx  890.82   Rx  845.82  Chan  0694  #694
Tx  890.85   Rx  845.85  Chan  0695  #695
Tx  890.88   Rx  845.88  Chan  0696  #696
Tx  890.91   Rx  845.91  Chan  0697  #697
Tx  890.94   Rx  845.94  Chan  0698  #698
Tx  890.97   Rx  845.97  Chan  0699  #699
Tx  891.00   Rx  846.00  Chan  0700  #700
Tx  891.03   Rx  846.03  Chan  0701  #701
Tx  891.06   Rx  846.06  Chan  0702  #702
Tx  891.09   Rx  846.09  Chan  0703  #703
Tx  891.12   Rx  846.12  Chan  0704  #704
Tx  891.15   Rx  846.15  Chan  0705  #705
Tx  891.18   Rx  846.18  Chan  0706  #706
Tx  891.21   Rx  846.21  Chan  0707  #707
Tx  891.24   Rx  846.24  Chan  0708  #708
Tx  891.27   Rx  846.27  Chan  0709  #709
Tx  891.30   Rx  846.30  Chan  0710  #710
Tx  891.33   Rx  846.33  Chan  0711  #711
Tx  891.36   Rx  846.36  Chan  0712  #712
Tx  891.39   Rx  846.39  Chan  0713  #713
Tx  891.42   Rx  846.42  Chan  0714  #714
Tx  891.45   Rx  846.45  Chan  0715  #715
Tx  891.48   Rx  846.48  Chan  0716  #716
Tx  891.51   Rx  846.51  Chan  0717  #717
Tx  891.54   Rx  846.54  Chan  0718  #718
Tx  891.57   Rx  846.57  Chan  0719  #719
Tx  891.60   Rx  846.60  Chan  0720  #720
Tx  891.63   Rx  846.63  Chan  0721  #721
Tx  891.66   Rx  846.66  Chan  0722  #722
Tx  891.69   Rx  846.69  Chan  0723  #723
Tx  891.72   Rx  846.72  Chan  0724  #724
Tx  891.75   Rx  846.75  Chan  0725  #725
Tx  891.78   Rx  846.78  Chan  0726  #726
Tx  891.81   Rx  846.81  Chan  0727  #727
Tx  891.84   Rx  846.84  Chan  0728  #728
Tx  891.87   Rx  846.87  Chan  0729  #729
Tx  891.90   Rx  846.90  Chan  0730  #730
Tx  891.93   Rx  846.93  Chan  0731  #731
Tx  891.96   Rx  846.96  Chan  0732  #732
Tx  891.99   Rx  846.99  Chan  0733  #733
Tx  892.02   Rx  847.02  Chan  0734  #734
Tx  892.05   Rx  847.05  Chan  0735  #735
Tx  892.08   Rx  847.08  Chan  0736  #736
Tx  892.11   Rx  847.11  Chan  0737  #737
Tx  892.14   Rx  847.14  Chan  0738  #738
Tx  892.17   Rx  847.17  Chan  0739  #739
Tx  892.20   Rx  847.20  Chan  0740  #740
Tx  892.23   Rx  847.23  Chan  0741  #741
Tx  892.26   Rx  847.26  Chan  0742  #742
Tx  892.29   Rx  847.29  Chan  0743  #743
Tx  892.32   Rx  847.32  Chan  0744  #744
Tx  892.35   Rx  847.35  Chan  0745  #745
Tx  892.38   Rx  847.38  Chan  0746  #746
Tx  892.41   Rx  847.41  Chan  0747  #747
Tx  892.44   Rx  847.44  Chan  0748  #748
Tx  892.47   Rx  847.47  Chan  0749  #749
Tx  892.50   Rx  847.50  Chan  0750  #750
Tx  892.53   Rx  847.53  Chan  0751  #751
Tx  892.56   Rx  847.56  Chan  0752  #752
Tx  892.59   Rx  847.59  Chan  0753  #753
Tx  892.62   Rx  847.62  Chan  0754  #754
Tx  892.65   Rx  847.65  Chan  0755  #755
Tx  892.68   Rx  847.68  Chan  0756  #756
Tx  892.71   Rx  847.71  Chan  0757  #757
Tx  892.74   Rx  847.74  Chan  0758  #758
Tx  892.77   Rx  847.77  Chan  0759  #759
Tx  892.80   Rx  847.80  Chan  0760  #760
Tx  892.83   Rx  847.83  Chan  0761  #761
Tx  892.86   Rx  847.86  Chan  0762  #762
Tx  892.89   Rx  847.89  Chan  0763  #763
Tx  892.92   Rx  847.92  Chan  0764  #764
Tx  892.95   Rx  847.95  Chan  0765  #765
Tx  892.98   Rx  847.98  Chan  0766  #766
Tx  893.01   Rx  848.01  Chan  0767  #767
Tx  893.04   Rx  848.04  Chan  0768  #768
Tx  893.07   Rx  848.07  Chan  0769  #769
Tx  893.10   Rx  848.10  Chan  0770  #770
Tx  893.13   Rx  848.13  Chan  0771  #771
Tx  893.16   Rx  848.16  Chan  0772  #772
Tx  893.19   Rx  848.19  Chan  0773  #773
Tx  893.22   Rx  848.22  Chan  0774  #774
Tx  893.25   Rx  848.25  Chan  0775  #775
Tx  893.28   Rx  848.28  Chan  0776  #776
Tx  893.31   Rx  848.31  Chan  0777  #777
Tx  893.34   Rx  848.34  Chan  0778  #778
Tx  893.37   Rx  848.37  Chan  0779  #779
Tx  893.40   Rx  848.40  Chan  0780  #780
Tx  893.43   Rx  848.43  Chan  0781  #781
Tx  893.46   Rx  848.46  Chan  0782  #782
Tx  893.49   Rx  848.49  Chan  0783  #783
Tx  893.52   Rx  848.52  Chan  0784  #784
Tx  893.55   Rx  848.55  Chan  0785  #785
Tx  893.58   Rx  848.58  Chan  0786  #786
Tx  893.61   Rx  848.61  Chan  0787  #787
Tx  893.64   Rx  848.64  Chan  0788  #788
Tx  893.67   Rx  848.67  Chan  0789  #789
Tx  893.70   Rx  848.70  Chan  0790  #790
Tx  893.73   Rx  848.73  Chan  0791  #791
Tx  893.76   Rx  848.76  Chan  0792  #792
Tx  893.79   Rx  848.79  Chan  0793  #793
Tx  893.82   Rx  848.82  Chan  0794  #794
Tx  893.85   Rx  848.85  Chan  0795  #795
Tx  893.88   Rx  848.88  Chan  0796  #796
Tx  893.91   Rx  848.91  Chan  0797  #797
Tx  893.94   Rx  848.94  Chan  0798  #798
Tx  893.97   Rx  848.97  Chan  0799  #799

Upper Set Part 2 (991-1023)

Tower Freq.  Mobile Freq.    11xxxx# Channel

Tx  869.04   Rx  824.04  Chan  0991  #800
Tx  869.07   Rx  824.07  Chan  0992  #801
Tx  869.10   Rx  824.10  Chan  0993  #802
Tx  869.13   Rx  824.13  Chan  0994  #803
Tx  869.16   Rx  824.16  Chan  0995  #804
Tx  869.19   Rx  824.19  Chan  0996  #805
Tx  869.22   Rx  824.22  Chan  0997  #806
Tx  869.25   Rx  824.25  Chan  0998  #807
Tx  869.28   Rx  824.28  Chan  0999  #808
Tx  869.31   Rx  824.31  Chan  1000  #809
Tx  869.34   Rx  824.34  Chan  1001  #810
Tx  869.37   Rx  824.37  Chan  1002  #811
Tx  869.40   Rx  824.40  Chan  1003  #812
Tx  869.43   Rx  824.43  Chan  1004  #813
Tx  869.46   Rx  824.46  Chan  1005  #814
Tx  869.49   Rx  824.49  Chan  1006  #815
Tx  869.52   Rx  824.52  Chan  1007  #816
Tx  869.55   Rx  824.55  Chan  1008  #817
Tx  869.58   Rx  824.58  Chan  1009  #818
Tx  869.61   Rx  824.61  Chan  1010  #819
Tx  869.64   Rx  824.64  Chan  1011  #820
Tx  869.67   Rx  824.67  Chan  1012  #821
Tx  869.70   Rx  824.70  Chan  1013  #822
Tx  869.73   Rx  824.73  Chan  1014  #823
Tx  869.76   Rx  824.76  Chan  1015  #824
Tx  869.79   Rx  824.79  Chan  1016  #825
Tx  869.82   Rx  824.82  Chan  1017  #826
Tx  869.85   Rx  824.85  Chan  1018  #827
Tx  869.88   Rx  824.88  Chan  1019  #828
Tx  869.91   Rx  824.91  Chan  1020  #829
Tx  869.94   Rx  824.94  Chan  1021  #830
Tx  869.97   Rx  824.97  Chan  1022  #831
Tx  870.00   Rx  825.00  Chan  1023  #832 or #0


T*R*I*K*-*C*L*I*P********************************************S*E*C*T*I*O*N***1*1

I got this from a BBS in the (708) are code.  It had no name associated
with it.  Since NOONE has mailed me any other info on it, I will keep this
in the bible until someone bitches or sends me something tangible.  Besides,
with Loadkit so readily available, who has the time to mess with it?
								-ML

			      MOTOROLA "TRIK-CLIP"


This is the plans I received for the Flip.  Supposedly if one knew the
pinouts on the other moto phones one could transpose. (maybe!)  I never
tested this so I don't know if it works.  The chip in the flip the text
is talking about is a 32 pin square plcc

After Phone Disassembly Locate 27c512 EPROM on phone board.  This is
On The Upper Right Side Of The Display Next To The Roam Indicator.
This Is a 32 pin Square device.  **Note the dot and beveled edge
for pin orientation (the dot is pin 1) Count to the left
counter clock wise 2 3 4 5 and so on.  To the Right or clockwise
of the dot is pin 32 Vcc.  This will aid you in your count to find
pin 25 which is the EPROM output enable.  This pin is at ground or
Vss - Level.  **Note Pin 25 on EPROM in phone must be lifted from
the phone board ground or Vss state.  Use an X-acto Knife and or
soldering iron and tools to cut pin at board level where pin
narrows.  Do not bend wide part of pin up on EPROM as this could
break off of EPROM.  Also Wide Part of pin Will be used to make
contact with EPROM test clip adapter.  The EPROM test clip adapter
will take pin 25 to logic high through an 8 to 10 thousand
resistor to pin 32 Vcc.  This will Gate off all data Commands from
the phone board EPROM and allow the EPROM test clip adapter to
take over.  **Note test clip could touch narrow part of cut off
pin on board and cause phone not to power up please remove or fold
down as low as possible so test clip only touches side of EPROM.

After programming is complete put pin 25 back together or find a
suitable ground or Vss - source.  The phone will power up and work
without pin 25 put back together but for long term precaution
put back to a logic zero or ground to enable the output enable.

To use the EPROM test clip adapter pull the locking wedge on the
test clip into the upper position.  Seat the EPROM test clip adapter
onto the EPROM in the phone.  Make sure to orient the dot and
beveled edge with each other.  Push the locking wedge down to lock
the EPROM test clip adapter onto the EPROM in the phone.  Hook up
the programming cable to the computer and plug into the jack on the
base of the phone.  Also hook up the loose lead with a jumper to the
center terminal between the battery contacts.  Turn power on green
light on phone display should come on then a complete display test
will light up after that the no service will blink along with the
signal level mark in corner of display.  If the antenna is still on
the phone it could change to roam or something else.  I  suggest
remove the antenna so the cell sight will not see you.  If you do
not get a power on test with the display there are 3 possible
things (1) pin 25 on phone board is touching the test clip this
can be checked by looking with a volt meter at pin 25 where
resistor connects for 4 to 5 volts pos with reference to ground.
(2) Test clip is not sitting on chip good some times you have pull
the test clip up off of the EPROM a 64th of an inch all the way
around.  (3) there is corrupt data, Pull the EPROM test clip off
Phone check to see if power on display is there.

Computer see if data or phone number or cell sight code or data
whole is ok I've seen the cell sight ID corrupt and the phone play
dead on  the power on test. The test clip sometimes needs
maintenance look at the gold pins.

Make sure all the pins are level with the edge of it.  If not take
an X-acto or pin and lightly bend them out so they are along the
edge of the plastic of the test clip.

Always check to see if EPROM in phone contacts are clean before
putting test clip on.  **Note when test clip is on phone - only
change the ESN only. *The other data phone number lock and so on
can be changed without the test clip and should be done so.

The software version in the test clip is 9148 you will see this in
the right corner of the computer.  Sometimes the program will crash
during the ESN write this will put all zeros in the ESN field
check the test clip try again.  Sometimes I've had to do this 3 or 4
times.  Also watch the phone display for codes I've seen at the end
of a write the code (FO8) just before power down I've had no
problem there but during the key write (FO8) means I've crashed.

Also during the time when the program is counting back into the
phone I've had (F1O) show up in the display of the phone this
problem means the next time you may not get the power on display
test pull test clip read phone check data to see if cell sight
code is corrupt or some other data correct try again.  A word of
caution do not push on EPROM on top of test clip as this could
seat EPROM lower into adapter and cause bad contact.  To remove
test clip pull locking wedge up to unlock the EPROM test clip
adapter from the EPROM in the phone.  Continue pulling up to lift
the EPROM test clip adapter from the EPROM in the phone.


P*A*G*E*R*S**************************************************S*E*C*T*I*O*N***1*2

Subject: BRAVO pagers - undocumented test features


SELF TEST:
     TO PUT UNIT INTO A SELF TEST TURN OFF PAGER. NOW HOLD DOWN THE
GRAY ARROW KEY AND BLACK LOCK KEY AT THE SAME TIME AND TURN ON
PAGER. THIS TELLS THE CPU IN PAGER TO GO INTO A SELF TEST. YOU WILL
GET A 2 SECOND LONG BEEP, RELEASE THE GRAY & BLACK BUTTON AND PUSH
THE GRAY BUTTON BEFORE THE 2 SECOND BEEP ENDS. IF YOU DID ALL THIS
IN TIME YOU WILL HAVE "SPL" OR "PAGING P?" AND NOT THE DOTTED LINE
YOU ARE USED TO SEEING WHEN YOU TURN ON PAGER . BY PRESSING THE
GRAY KEY IT WILL GO TO A DISPLAY TEST, PRESS AGAIN AND YOU WILL GET
THE PAGERS CAPCODE (CAPCODE IS THE UNIQUE SERIAL NUMBER WHICH THE
PAGING TRANSMITTERS TRANSMITS TO YOUR PAGER TO TURN ON YOUR PAGER
WHEN SOMEONE PAGES YOU). WAIT AND IN ABOUT 3 SECONDS IT WILL
DISPLAY YOUR SECOND CAPCODE (IF YOU HAVE ONE-MOST DON'T) PRESS THE
GRAY KEY AGAIN AND IT WILL CHECK CONTROLS, PRESS IT AGAIN AND IT
WILL TEST VIBRATOR FUNCTION (IF YOUR PAGER HAS IT). TURN OFF PAGER
AND TURN ON AGAIN TO DISABLE SELF TEST.

SPECIAL PROGRAMMED FEATURES:
     TAKE OFF BATTERIES CLIP AND IN CENTER TOWARD THE FRONT OF
PAGER YOU WILL SEE A PRINTED CIRCUIT BOARD EDGE PINS (JUST LIKE THE
BACK SIDE OF A NETENDO CARTAGE. THIS EDGE PINS ARE PLUGGED INTO A
CORE PROGRAMMER. THE PROGRAMMER CAN CHANGE.

     CAPCODES: SEE ABOVE

     AUTORESET TO MANUAL: YOUR PAGER IN AUTORESET WILL BEEP 8 TIMES
THEN STOP BEEPING. MANUAL RESET THE BEEPER WILL KEEP BEEPING TILL
THE COWS COME HOME OR YOU PUSH A BUTTON TO LOOK AT THE MESSAGE.

     DISPLAY: ENGLISH PROMPTS OR INTERNATIONAL-SYMBOL SCREENS
DISPLAYED.

     SILENT MODE CHIRP: FOR A SINGLE BEEP WHEN YOUR PAGED. NOT FOR
USE ON VIBRATOR PAGERS.

     BEEP ON BAD DATA: YOUR PAGER HEARS IT'S CAPCODE BUT RECEIVED
BAD DISPLAY MESSAGE, IT WILL PUT "EEE" ACROSS DISPLAY TO SHOW BAD
RECEIVE. IF THIS IS FEATURE IS NOT ENABLED AND YOU RECEIVE BAD DATA
YOUR PAGER WILL NOT BEEP AND YOU WILL HAVE NO IDEA SOMEONE TRYED TO
PAGE YOU.


******************************************************************
NOW LETS SAY YOU ARE UNHAPPY WITH YOUR PAGING COMPANY "A" BUT OWN
YOUR PAGER. YOUR $200.00+ PAGER IS TUNED TO THEIR FREQUENCY AND YOU
WANT TO GO TO ANOTHER PAwriteOMPANY BUT NOT LOSE ALL THE MONEY YOU
SPENT FOR YOUR PAGER. THE ANSWER IS TO RECRYSTAL PAGER TO THE NEW
FREQUENCY OF COMPANY "B". BUT WE MUST ANSWER SOME QUESTIONS FIRST
TO SEE WHAT IT WILL COST.

     1. WHAT IS YOUR PAGERS CODING FORMAT (POCSAG) OR (GSC)
	  THE EASY WAY TO TELL IS TO DO A SELF TEST AND READ
	  CAPCODE. IF IT'S 7 NUMBERS IT'S POCSAG. IF IT'S 6 NUMBERS
	  AND 1 LETTER IT'S GSC. IF YOUR PAGER DOES NOT MATCH THE
	  SAME CODING FORMAT AS COMPANY "B" IT WILL COST MORE THEN
	  IT'S WORTH TO CHANGE.

     2. WHAT BAUD RATE IS YOUR PAGER WORKING AT ? DO SELF TEST AND
IF DISPLAY SHOWS PAGING P1 PAGER IS WORKING AT 1200 BAUD OTHER WISE
YOU ARE SAFE TO ASSUME 512 BAUD IT MUST MATCH COMPANY "B" BAUD RATE
TO BE WORTH YOUR TIME.

     3. ARE YOU IN THE SAME FREQUENCY BAND 931 MHz OR 450 MHz ETC.
IF COMPANY "A" AND COMPANY "B" ARE NOT IN SAME BAND IT WILL TAKE A
NEW RECEIVER BOARD TO CONVERT PAGER AND COST TO MUCH TO TRY.

     IF ALL THE ANSWERS ABOVE SHOW YOU ARE COMPATIBLE YOU CAN CALL
COMPANY "B" AND TELL THEM YOU WANT TO DO BUSINESS WITH THEM AND
NEED A CAPCODE NUMBER SO YOU CAN GET PAGER RECRYSTALED AND HAVE A
CAPCODE PROGRAMMED AT THE SAME TIME.

     NOW YOU CAN HAVE COMPANY "B" RECOMMEND A SHOP THAT WILL
RECRYSTAL PAGER OR LOOK UP ONE YOURSELF.

(sorry for the all caps, that was how I received it and I am lazy.   -ML)


D*I*S*C*L*A*I*M*E*R******************************************S*E*C*T*I*O*N***1*3

DISCLAIMER:  I, Mike Larsen, accept NO responsibility for people using any
info within this text for fraudulent purposes.  I did not intend for the info
to be used towards fraud or theft of services.  The main reason I spent
hundreds of hours creating and compiling this information is because
programming fees are BULLSHIT and they know it.  Programming fees are the
equivalent to the Refrigerator installer guy charging 50 bucks to plug the
damn thing in to the wall.
	Oh, by the way, I forgot to mention in the above disclaimer that I do
nothing fraudulent with MY fone.  I pay a bill and everything and can prove
it.  So will the "feds" or whoever the Internet Gestapo is that's been sending
me mail about me being under their "watchful eye", please go for someone else
that's dealing child pornography or asking for WaReZ?  Thanks.
	The sole reason I compiled this info into book form is to let people
that are capable, work on their phone.  Again, I did not compile this for the
purpose of fraud.

        mjlarsen@hotmail.com

******T*H*E***E*N*D*****T*H*E***E*N*D******T*H*E***E*N*D*****T*H*E***E*N*D******